Table of Contents
Installing a supercharger on your Infiniti Q50 can significantly enhance its performance, providing a boost in horsepower and torque. This step-by-step guide will walk you through the installation process, as well as provide a cost analysis to help you budget for this upgrade.
Tools and Materials Needed
- Supercharger kit specific to Infiniti Q50
- Socket set
- Wrenches
- Screwdrivers
- Torque wrench
- Vacuum pump
- Engine oil
- Coolant
- Gasket sealant
- Safety glasses
- Mechanic gloves
Preparation Steps
Before starting the installation, ensure you have all the necessary tools and materials. Additionally, follow these preparation steps:
- Park your Infiniti Q50 on a flat surface and engage the parking brake.
- Disconnect the battery to prevent any electrical issues during installation.
- Remove any engine covers or components that may obstruct access to the engine.
Step-by-Step Installation Guide
1. Remove the Stock Intake System
Begin by removing the stock intake system. This includes the air filter, intake tubes, and throttle body. Use the socket set to loosen and remove the bolts securing these components.
2. Install the Supercharger Bracket
Next, install the supercharger bracket onto the engine. Align it with the existing mounting points and secure it using the provided bolts. Make sure to torque the bolts to the manufacturer’s specifications.
3. Mount the Supercharger
Carefully mount the supercharger onto the bracket. Ensure that it is aligned properly and secure it with the necessary bolts. Again, torque these bolts to the specified settings.
4. Connect the Intake and Throttle Body
Connect the supercharger to the intake system and throttle body. Use the provided hoses and clamps to ensure a tight fit. Make sure there are no air leaks in the system.
5. Install the Fuel Injectors
Remove the stock fuel injectors and replace them with the high-flow injectors included in the supercharger kit. Ensure that they are seated properly and securely connected.
6. Connect the Supercharger to the Battery
Connect the supercharger’s electrical components to the battery. Ensure that all connections are secure and that the wiring is properly routed to avoid any damage.
7. Refill Fluids
Refill the engine oil and coolant as necessary. Make sure to use the recommended fluids for your Infiniti Q50.
8. Reconnect the Battery
Reconnect the battery and ensure all connections are tight. Start the engine and check for any unusual noises or leaks.
Cost Analysis
Installing a supercharger can vary in cost depending on the brand and type of supercharger you choose. Here’s a breakdown of potential costs:
- Supercharger kit: $3,000 – $7,000
- Labor (if not DIY): $500 – $1,500
- Additional parts (hoses, clamps, etc.): $200 – $500
- Fluids (oil, coolant): $100 – $200
Final Thoughts
Installing a supercharger on your Infiniti Q50 can be a rewarding project that enhances your vehicle’s performance. By following this step-by-step guide and considering the cost analysis, you can make an informed decision about this upgrade. Always remember to consult with a professional mechanic if you are unsure about any part of the installation process.