Table of Contents
Installing a Vortech supercharger on your Mitsubishi Eclipse can significantly enhance its performance, providing an impressive boost of over 150 horsepower. This guide will walk you through the essential steps required for a successful installation.
Tools and Materials Needed
- Vortech supercharger kit
- Socket set
- Wrenches
- Screwdrivers
- Torque wrench
- Vacuum gauge
- Fuel pressure gauge
- Hoses and clamps
- Oil for supercharger
- Safety goggles and gloves
Preparation Steps
Before beginning the installation, ensure that you have a clean and organized workspace. Gather all necessary tools and parts, and make sure to wear safety goggles and gloves for protection.
Disconnect the Battery
Start by disconnecting the negative terminal of the battery to prevent any electrical issues during the installation process.
Remove the Stock Components
Next, remove the stock air intake and any components that may obstruct access to the engine. This may include:
- Air filter
- Intake manifold
- Throttle body
Installing the Vortech Supercharger
With the stock components removed, you can now begin the installation of the Vortech supercharger. Follow these steps carefully.
Mount the Supercharger Bracket
Begin by mounting the supercharger bracket to the engine. Ensure that it is secured tightly using the appropriate bolts and a torque wrench.
Install the Supercharger
Next, attach the Vortech supercharger to the bracket. Make sure to align it properly and secure it with the provided hardware.
Connect the Intake and Oil Lines
Connect the intake piping to the supercharger, ensuring a tight fit. Additionally, connect the oil lines as per the manufacturer’s instructions to ensure proper lubrication.
Finalizing the Installation
After installing the supercharger, it’s important to reassemble the components that were removed earlier.
Reinstall the Throttle Body and Intake Manifold
Carefully reinstall the throttle body and intake manifold, ensuring that all gaskets are in good condition to prevent any air leaks.
Reconnect the Battery
Once everything is reassembled, reconnect the negative terminal of the battery. This will restore power to the vehicle.
Testing the Installation
Before taking your Mitsubishi Eclipse for a drive, it’s crucial to test the installation to ensure everything is functioning correctly.
Check for Leaks
Start the engine and allow it to idle. Check for any oil or vacuum leaks around the supercharger and connections. If any leaks are found, address them immediately.
Monitor Engine Performance
Use a vacuum gauge and fuel pressure gauge to monitor the engine’s performance. Ensure that the readings are within the manufacturer’s specifications.
Conclusion
Installing a Vortech supercharger on your Mitsubishi Eclipse can dramatically increase its horsepower and overall performance. By following these steps and ensuring proper installation, you can enjoy the benefits of enhanced power and driving experience.