Table of Contents
The AMG GT R is a high-performance sports car that deserves an equally impressive exhaust system. Installing an Akrapovic exhaust can enhance the sound, performance, and overall driving experience of your vehicle. This guide will walk you through the installation process step-by-step, along with real-world sound tests to showcase the difference an Akrapovic exhaust can make.
Tools and Materials Needed
- Akrapovic Exhaust System
- Socket Set
- Torque Wrench
- Jack and Jack Stands
- Safety Glasses
- Gloves
- Cutting Tool (if necessary)
Before starting the installation, ensure you have all the necessary tools and materials at hand. This will make the process smoother and more efficient.
Preparation Steps
Preparation is key to a successful exhaust installation. Follow these steps to get ready:
- Park your AMG GT R on a flat surface and engage the parking brake.
- Disconnect the battery to prevent any electrical issues during installation.
- Raise the vehicle using a jack and secure it with jack stands.
Once you’ve prepared your workspace, you can start the installation process.
Step-by-Step Installation Process
Removing the Stock Exhaust
Begin by removing the stock exhaust system:
- Locate the connection points of the stock exhaust.
- Using the socket set, loosen and remove the bolts securing the exhaust to the exhaust manifold and the rear section.
- If necessary, use a cutting tool to remove any parts that are too rusted or stuck.
- Carefully remove the exhaust system from the vehicle and set it aside.
Installing the Akrapovic Exhaust
Now that the stock exhaust is removed, you can install the Akrapovic exhaust:
- Begin by aligning the Akrapovic exhaust with the connection points.
- Secure the exhaust using the bolts provided in the kit. Make sure to follow the manufacturer’s torque specifications.
- Ensure all clamps and connections are tight and secure.
Once the exhaust is installed, double-check all connections to ensure there are no leaks.
Final Steps
After the installation is complete, you need to perform a few final steps:
- Reconnect the battery.
- Start the engine and listen for any unusual sounds indicating a leak.
- Lower the vehicle back to the ground.
Congratulations! You have successfully installed the Akrapovic exhaust on your AMG GT R.
Real-World Sound Tests
To truly appreciate the benefits of the Akrapovic exhaust, we conducted real-world sound tests comparing the stock exhaust and the Akrapovic system. Here’s what we found:
- Stock Exhaust: The stock exhaust produced a muted sound, with a focus on comfort rather than performance.
- Akrapovic Exhaust: The Akrapovic system delivered a deep, aggressive tone that enhanced the driving experience, especially at higher RPMs.
In addition to sound, the Akrapovic exhaust also improved throttle response and overall performance, making it a worthy upgrade for any AMG GT R owner.
Conclusion
Installing an Akrapovic exhaust on your AMG GT R is a straightforward process that can significantly enhance your vehicle’s performance and sound. By following this step-by-step guide, you can enjoy the benefits of a high-quality exhaust system. Always remember to prioritize safety and double-check your work for the best results.