Table of Contents
Installing an Aeromotive fuel pump in your Nissan 370Z can enhance performance and reliability. This step-by-step guide will walk you through the process, ensuring you have everything you need to complete the installation safely and effectively.
Tools and Materials Needed
- Aeromotive fuel pump kit
- Socket set
- Wrenches
- Screwdrivers
- Fuel line disconnect tool
- Safety glasses
- Rubber gloves
- Shop towels
- Electrical tape
Preparation Steps
Before starting the installation, it’s essential to prepare your workspace and vehicle. Follow these preparation steps:
- Ensure the vehicle is parked on a flat surface.
- Disconnect the negative battery terminal.
- Relieve the fuel system pressure by removing the fuel pump fuse and starting the engine until it stalls.
- Gather all tools and materials in one location.
Removing the Old Fuel Pump
To install the new Aeromotive fuel pump, you first need to remove the old pump. Follow these steps:
- Access the fuel pump by removing the rear seat and locating the access panel.
- Unscrew the access panel and lift it off to expose the fuel pump assembly.
- Disconnect the electrical connectors from the old fuel pump.
- Use the fuel line disconnect tool to detach the fuel lines from the pump.
- Remove the retaining ring and lift the old pump out of the fuel tank.
Installing the Aeromotive Fuel Pump
With the old pump removed, you can now install the Aeromotive fuel pump. Follow these steps:
- Place the new Aeromotive fuel pump into the fuel tank.
- Secure it with the retaining ring, ensuring it is tightly fastened.
- Reconnect the fuel lines to the new pump, ensuring a snug fit.
- Reconnect the electrical connectors to the new fuel pump.
Reassembling the Fuel Pump Access
After installing the new fuel pump, it’s time to reassemble the access panel. Follow these steps:
- Replace the access panel and secure it with screws.
- Reinstall the rear seat.
- Reconnect the negative battery terminal.
Testing the New Fuel Pump
Once the installation is complete, it’s essential to test the new fuel pump to ensure it operates correctly. Follow these steps:
- Turn the ignition key to the “ON” position without starting the engine. This will prime the fuel system.
- Check for any fuel leaks around the pump and connections.
- Start the engine and listen for the fuel pump operating sound.
- Take the vehicle for a short test drive to ensure proper performance.
Conclusion
Installing an Aeromotive fuel pump in your Nissan 370Z can significantly improve fuel delivery and engine performance. By following this step-by-step guide, you can ensure a successful installation. Always remember to prioritize safety and consult a professional if you encounter any difficulties during the process.