How to Install an Ams Gt-r Intercooler: Step-by-step Guide for Beginners

by

Installing an AMS GT-R intercooler can significantly enhance your vehicle’s performance. This step-by-step guide is tailored for beginners, ensuring you have the necessary information and tools to complete the installation successfully.

Tools and Materials Needed

  • AMS GT-R intercooler kit
  • Socket set
  • Wrenches
  • Screwdrivers
  • Torque wrench
  • Pipe cutter (if necessary)
  • Heat-resistant silicone couplers
  • Clamps
  • Safety glasses
  • Gloves

Preparation Steps

Before starting the installation, ensure that you have all the necessary tools and materials ready. Follow these preparation steps:

  • Park the vehicle on a flat surface and engage the parking brake.
  • Disconnect the negative battery terminal to prevent any electrical issues.
  • Allow the engine to cool completely to avoid burns.

Removing the Stock Intercooler

The first major step is to remove the stock intercooler. Follow these instructions:

  • Locate the stock intercooler, which is usually situated in front of the radiator.
  • Remove any plastic covers or shrouds that may obstruct access.
  • Disconnect the intake and outlet pipes from the stock intercooler. Use a wrench or screwdriver as needed.
  • Remove the mounting bolts securing the intercooler to the vehicle.
  • Carefully lift the stock intercooler out of the vehicle.

Installing the AMS GT-R Intercooler

With the stock intercooler removed, you can now install the AMS GT-R intercooler. Follow these steps:

  • Position the AMS intercooler in the same location as the stock unit.
  • Secure the intercooler using the original mounting points and bolts.
  • Connect the intake and outlet pipes to the new intercooler using heat-resistant silicone couplers.
  • Ensure all clamps are tightened securely to prevent leaks.

Final Steps

After installing the AMS GT-R intercooler, it’s essential to complete a few final steps:

  • Double-check all connections and ensure there are no loose clamps or pipes.
  • Reconnect the negative battery terminal.
  • Start the engine and allow it to idle for a few minutes.
  • Check for any leaks around the intercooler and connections.
  • Take the vehicle for a short test drive to ensure proper operation.

Tips for Beginners

Here are some helpful tips for those new to installing intercoolers:

  • Take your time and don’t rush the installation process.
  • Refer to the AMS installation manual for specific instructions related to your model.
  • Consider asking a friend with experience for assistance if you’re unsure.
  • Keep your workspace organized to avoid losing small parts.

Conclusion

Installing an AMS GT-R intercooler can be a rewarding project that enhances your vehicle’s performance. By following this step-by-step guide, even beginners can tackle this installation with confidence. Remember to take your time and ensure everything is secured properly for the best results.