Table of Contents
The Audi RS5 is known for its impressive performance and sleek design, but enthusiasts often seek to enhance both the sound and power of their vehicle. Installing an APR performance exhaust system is a popular modification that can significantly improve your driving experience. This guide will walk you through the steps to install an APR Audi RS5 performance exhaust, ensuring you achieve that desired sound and power boost.
Tools and Materials Needed
- APR performance exhaust system
- Jack and jack stands
- Socket set
- Wrenches
- Torque wrench
- Cutting tool (if necessary)
- Safety glasses
- Gloves
Before starting the installation, make sure you have all the necessary tools and materials at hand. Ensuring you have everything ready will make the process smoother and more efficient.
Preparation Steps
Before you begin the installation, it’s crucial to prepare your workspace and the vehicle. Follow these steps:
- Park your Audi RS5 on a flat surface and engage the parking brake.
- Use the jack to lift the rear of the vehicle and secure it with jack stands.
- Wear safety glasses and gloves to protect yourself during the installation.
Removing the Stock Exhaust
With the vehicle prepared, it’s time to remove the stock exhaust system. Follow these steps carefully:
- Locate the exhaust hangers and remove them using a socket or wrench.
- If necessary, cut the exhaust pipes to detach them from the exhaust manifold.
- Carefully slide the stock exhaust system out from under the vehicle.
- Inspect the exhaust hangers and replace them if they are worn or damaged.
Installing the APR Performance Exhaust
Now that the stock exhaust is removed, you can install the APR performance exhaust. Follow these steps:
- Begin by positioning the APR exhaust system under the vehicle.
- Align the exhaust pipes with the exhaust manifold and connect them securely.
- Reattach the exhaust hangers to ensure the system is properly supported.
- Use a torque wrench to tighten all bolts to the manufacturer’s specifications.
Final Checks and Testing
After the installation is complete, it’s essential to perform some final checks:
- Double-check all connections and bolts to ensure they are tight.
- Lower the vehicle from the jack stands and start the engine.
- Listen for any unusual sounds that may indicate a leak or improper installation.
- Take the vehicle for a test drive to experience the enhanced sound and power.
Conclusion
Installing an APR performance exhaust on your Audi RS5 can significantly enhance both sound and power, providing a more thrilling driving experience. By following the steps outlined in this guide, you can successfully complete the installation and enjoy the benefits of your new exhaust system. Always remember to follow safety precautions and consult a professional if you encounter any challenges during the process.