Table of Contents
The FA24 engine, known for its performance potential, can be significantly enhanced with the installation of an Invidia cat-back exhaust system. This upgrade not only improves power output but also enhances the sound profile of your vehicle. In this guide, we will walk you through the steps necessary to install the Invidia cat-back exhaust on your FA24 engine.
Tools and Materials Needed
- Invidia Cat-Back Exhaust System
- Socket set
- Wrenches
- Jack and jack stands
- Torque wrench
- Safety glasses
- Gloves
- Rubber mallet
Before starting the installation, ensure you have all the necessary tools and materials ready. This preparation will make the process smoother and more efficient.
Preparation Steps
Proper preparation is crucial for a successful installation. Follow these steps to get your workspace ready:
- Park your vehicle on a flat surface and engage the parking brake.
- Lift the rear of the car using a jack and secure it with jack stands.
- Put on safety glasses and gloves to protect yourself during the installation.
Removing the Stock Exhaust
To install the Invidia cat-back exhaust, you must first remove the stock exhaust system. Follow these steps:
- Locate the stock exhaust hangers and remove them using a socket wrench.
- Disconnect the exhaust from the catalytic converter by loosening the bolts.
- Carefully slide the stock exhaust system out from the hangers and remove it from the vehicle.
Make sure to keep all the bolts and hangers, as you may need them for the new exhaust installation.
Installing the Invidia Cat-Back Exhaust
With the stock exhaust removed, you can now install the Invidia cat-back exhaust. Follow these steps for proper installation:
- Begin by placing the Invidia exhaust system into position, aligning it with the exhaust hangers.
- Using the bolts you removed earlier, connect the exhaust to the catalytic converter.
- Secure all connections by tightening the bolts with a socket wrench.
- Ensure that the exhaust is properly aligned and does not touch any other components of the vehicle.
Securing the Exhaust System
Once the exhaust is in place, it is important to secure it properly. Follow these steps:
- Reinstall the exhaust hangers, ensuring they are tightly secured.
- Use a torque wrench to tighten the bolts to the manufacturer’s specifications.
- Double-check all connections and ensure there are no leaks.
Final Checks and Testing
After installation, it’s important to perform a few final checks:
- Start the engine and listen for any unusual sounds that may indicate a leak.
- Check the exhaust tips for proper alignment and clearance.
- Take the vehicle for a short drive to ensure everything is functioning correctly.
Conclusion
Installing an Invidia cat-back exhaust on your FA24 engine can greatly enhance both power and sound. By following the steps outlined in this guide, you can successfully complete the installation and enjoy the benefits of improved performance. Always remember to follow safety precautions and consult a professional if you encounter any difficulties during the installation process.