Table of Contents
Installing and tuning a Mopar Performance B&M Shift Kit can significantly enhance your vehicle’s performance on the drag strip. This guide will walk you through the necessary steps to ensure optimal results.
Understanding the B&M Shift Kit
The B&M Shift Kit is designed to improve the shifting performance of your Mopar transmission. It provides quicker shifts, which can lead to better acceleration and overall performance on the drag strip.
Benefits of the B&M Shift Kit
- Improved shift response
- Increased durability
- Enhanced throttle response
- Better control during high-performance driving
Gathering Necessary Tools and Parts
Before starting the installation, make sure you have the following tools and parts ready:
- Socket set
- Wrench set
- Screwdrivers
- Torque wrench
- Fluid catch pan
- New transmission fluid
- B&M Shift Kit
Installation Steps
Follow these steps to install the B&M Shift Kit:
- Step 1: Disconnect the battery to ensure safety during the installation.
- Step 2: Raise the vehicle using jack stands for better access to the transmission.
- Step 3: Remove the transmission pan and drain the fluid into a catch pan.
- Step 4: Identify the valve body and remove it according to the kit instructions.
- Step 5: Install the shift kit components as per the instructions provided with the kit.
- Step 6: Reassemble the valve body and transmission pan, ensuring all bolts are torqued to specifications.
- Step 7: Refill the transmission with new fluid and reconnect the battery.
Tuning the Shift Kit
After installation, tuning the shift kit is crucial for achieving the best performance. Here’s how to tune it:
- Step 1: Start the engine and allow it to reach operating temperature.
- Step 2: Check the fluid level and adjust if necessary.
- Step 3: Adjust the shift points based on your driving style and drag strip requirements.
- Step 4: Test drive the vehicle and make further adjustments as needed.
Testing and Adjusting Performance
Once the shift kit is installed and tuned, testing its performance is essential. Follow these steps:
- Step 1: Take the vehicle to the drag strip for a controlled environment.
- Step 2: Conduct several runs to evaluate the shift performance.
- Step 3: Monitor the vehicle’s acceleration and shifting behavior.
- Step 4: Make any necessary adjustments to the tuning based on your observations.
Common Issues and Troubleshooting
During installation or tuning, you may encounter some common issues. Here are solutions to address them:
- Issue: Slipping transmission – Check fluid level and adjust as needed.
- Issue: Harsh shifting – Adjust the tuning for smoother transitions.
- Issue: Delayed shifts – Inspect installation for proper alignment and contact points.
Conclusion
Installing and tuning a Mopar Performance B&M Shift Kit can greatly enhance your drag strip performance. By following the steps outlined in this guide, you can ensure that your vehicle is ready for the track and able to deliver optimal results.