How to Install Brz Headers: Step-by-step Guide for Better Performance

by

Installing BRZ headers can significantly enhance your vehicle’s performance. In this guide, we will walk you through the step-by-step process to install BRZ headers effectively.

What You Will Need

  • BRZ headers
  • Socket wrench set
  • Torque wrench
  • Gasket scraper
  • New gaskets
  • Safety glasses
  • Gloves

Before you begin, ensure you have all the necessary tools and parts. This will make the installation process smoother and more efficient.

Preparation Steps

Preparation is key to a successful installation. Follow these steps to prepare your workspace and vehicle.

  • Park your vehicle on a flat surface.
  • Disconnect the battery to prevent any electrical issues.
  • Raise the vehicle using jack stands for easy access to the exhaust system.

Removing the Old Headers

The first major step in the installation process is removing the old headers. Follow these steps carefully.

  • Locate the bolts securing the old headers to the engine.
  • Use a socket wrench to remove the bolts. Keep them in a safe place for reinstallation.
  • Carefully detach the old headers from the exhaust system.
  • Remove any old gaskets and clean the surface with a gasket scraper.

Installing the New BRZ Headers

Now that the old headers are removed, you can proceed to install the new BRZ headers. Follow these steps:

  • Position the new headers in place, aligning them with the engine ports.
  • Install new gaskets to ensure a proper seal.
  • Secure the headers by hand-tightening the bolts first.
  • Use a torque wrench to tighten the bolts to the manufacturer’s specifications.

Reconnecting the Exhaust System

After the headers are securely installed, the next step is to reconnect the exhaust system.

  • Align the exhaust pipes with the new headers.
  • Secure the connections using the original bolts or new ones if necessary.
  • Make sure all connections are tight and leak-free.

Final Steps

Once everything is connected, there are a few final steps to complete the installation.

  • Reconnect the battery.
  • Start the engine and listen for any unusual sounds.
  • Check for exhaust leaks around the new headers.

Conclusion

Installing BRZ headers can greatly improve your vehicle’s performance. By following these steps carefully, you can ensure a successful installation. Always remember to prioritize safety and consult a professional if you encounter any difficulties during the process.