Table of Contents
Are you looking to enhance the performance of your Acura TL Type S? Installing a Comptech Cold Air Intake can be a great way to achieve an increase in horsepower and improve engine efficiency. In this guide, we will walk you through the steps to install the Comptech Cold Air Intake on your Acura TL Type S for around $300 and gain approximately 10 horsepower.
What You Will Need
- Comptech Cold Air Intake Kit
- Socket set
- Wrenches
- Screwdrivers (flathead and Phillips)
- Rubber gloves
- Safety glasses
- Shop towels
Before you begin, make sure you have all the necessary tools and equipment. This will ensure a smooth installation process without any interruptions.
Step-by-Step Installation Guide
Step 1: Preparation
Start by parking your Acura TL Type S on a flat surface and turning off the engine. Allow the engine to cool completely. Disconnect the negative battery terminal to prevent any electrical issues during the installation.
Step 2: Remove the Stock Air Intake
Locate the stock air intake system. Use your socket set to remove the bolts and screws securing the air intake to the engine bay. Carefully disconnect any hoses or clamps attached to the stock intake, and remove it from the vehicle.
Step 3: Install the Comptech Cold Air Intake
Unbox the Comptech Cold Air Intake kit and lay out all components. Begin by attaching the new intake pipe to the throttle body. Ensure it fits snugly and secure it using the provided clamps.
Next, position the air filter in the designated area and attach it to the intake pipe. Make sure it is properly secured and positioned away from any heat sources.
Step 4: Reconnect Components
Reconnect any hoses or electrical connections that were removed during the disassembly. Double-check that all clamps and bolts are tightened securely. Ensure there are no loose components that could affect performance.
Step 5: Reconnect the Battery and Test
Once everything is reconnected, reattach the negative battery terminal. Start your engine and let it idle for a few minutes. Listen for any unusual sounds and check for any leaks around the intake area.
Performance Gains
After installation, you should notice an improvement in throttle response and acceleration. The Comptech Cold Air Intake is designed to increase airflow, which can lead to gains of up to 10 horsepower. This enhancement not only improves performance but can also lead to better fuel efficiency.
Maintenance Tips
- Regularly check the air filter and clean or replace it as needed.
- Inspect the intake system for any loose connections or damage.
- Keep the engine bay clean to prevent debris from entering the intake.
Following these maintenance tips will ensure that your Comptech Cold Air Intake continues to perform optimally over time.
Conclusion
Installing a Comptech Cold Air Intake on your Acura TL Type S is an excellent way to boost performance while staying within a reasonable budget. With just a few tools and some time, you can achieve significant horsepower gains and improve your driving experience. Enjoy the enhanced performance and the satisfaction of completing the installation yourself!