Table of Contents
Installing Eibach Springs on your Giulia Quadrifoglio can significantly enhance your vehicle’s handling and performance. With an investment of around $700, you can achieve improved handling characteristics and an increase of approximately 10 horsepower. This guide will walk you through the step-by-step process of installing these springs and reaping the benefits of better performance.
Benefits of Eibach Springs
Eibach Springs are known for their quality and performance enhancements. Here are some key benefits:
- Improved Handling: Lowering your vehicle’s center of gravity enhances cornering stability.
- Increased Performance: Eibach Springs can provide a slight horsepower gain due to reduced weight transfer.
- Enhanced Aesthetics: Lowering the ride height gives your Giulia a more aggressive stance.
- Durability: Eibach springs are built to last, offering a reliable upgrade for your vehicle.
Tools and Materials Needed
Before starting the installation, ensure you have the following tools and materials:
- Socket set
- Torque wrench
- Spring compressors
- Jack and jack stands
- Flathead and Phillips screwdrivers
- Safety glasses
- Eibach Springs kit
Step-by-Step Installation Guide
Step 1: Prepare Your Vehicle
Start by parking your Giulia Quadrifoglio on a flat surface and engaging the parking brake. Gather all tools and materials, and wear safety glasses for protection.
Step 2: Lift the Vehicle
Using a jack, lift the front of the vehicle and secure it with jack stands. Repeat this process for the rear of the vehicle. Ensure the car is stable before proceeding.
Step 3: Remove the Wheels
Use a socket set to remove the lug nuts and take off the wheels. This will give you access to the suspension components.
Step 4: Remove the Stock Springs
Using a torque wrench, detach the strut assembly from the vehicle. Carefully use spring compressors to compress the stock springs before removing them from the strut assembly.
Step 5: Install Eibach Springs
Place the Eibach Springs onto the strut assembly. Ensure they are seated correctly, and slowly release the spring compressors to secure the springs in place.
Step 6: Reattach the Strut Assembly
Reattach the strut assembly to the vehicle, ensuring all bolts are tightened to the manufacturer’s specifications using a torque wrench.
Step 7: Repeat for the Rear
Follow the same process for the rear springs. Remove the rear strut assembly, replace the stock springs with Eibach Springs, and reattach the assembly.
Step 8: Reinstall the Wheels
Once all springs are installed, put the wheels back on and hand-tighten the lug nuts. Lower the vehicle back to the ground and then use a torque wrench to fully tighten the lug nuts.
Step 9: Final Check
After the installation, perform a final check on all components to ensure everything is secure. It’s also a good idea to have a professional alignment done after changing your springs.
Conclusion
Installing Eibach Springs on your Giulia Quadrifoglio is a straightforward process that can yield significant improvements in handling and performance. With careful attention to detail and the right tools, you can enhance your driving experience and enjoy the benefits of this upgrade.