How to Install Hks High-flow Intake on Your Gr Corolla G16e-gts: a Complete Step-by-step Guide

by

The GR Corolla G16E-GTS is a remarkable vehicle, and enhancing its performance can be achieved with the installation of an HKS high-flow intake. This guide will walk you through the process step-by-step, ensuring you have a smooth installation experience.

What You Will Need

  • HKS High-Flow Intake Kit
  • Socket wrench set
  • Screwdrivers (flathead and Phillips)
  • Torque wrench
  • Shop towels
  • Safety goggles
  • Gloves

Before you begin, ensure you have all the necessary tools and equipment ready. This will help streamline the installation process and prevent any interruptions.

Preparation Steps

Start by preparing your workspace. Make sure you are in a well-ventilated area and have adequate lighting. Follow these preparation steps:

  • Park your GR Corolla on a flat surface.
  • Turn off the engine and allow it to cool down.
  • Disconnect the negative terminal of the battery to prevent any electrical issues.

Removing the Stock Intake

With your vehicle prepared, you can now begin removing the stock intake system. Follow these steps carefully:

  • Locate the stock intake system in your engine bay.
  • Using a socket wrench, remove the bolts securing the intake to the engine.
  • Disconnect any hoses or sensors attached to the stock intake.
  • Carefully lift the stock intake out of the engine bay and set it aside.

Installing the HKS High-Flow Intake

Now that the stock intake has been removed, you can proceed with the installation of the HKS high-flow intake. Follow these steps:

  • Unbox the HKS high-flow intake kit and ensure all components are included.
  • Position the new intake in the engine bay where the stock intake was located.
  • Secure the intake using the provided bolts and a socket wrench.
  • Reconnect any hoses or sensors that were disconnected during removal.
  • Ensure all connections are tight and secure.

Final Adjustments and Checks

After the installation, it’s important to make final adjustments and checks to ensure everything is functioning properly. Follow these steps:

  • Double-check all connections and bolts for tightness.
  • Reconnect the negative terminal of the battery.
  • Start the engine and listen for any unusual sounds.
  • Check for any warning lights on the dashboard.

Testing Your Installation

Once you have completed the installation and final checks, it is time to test your GR Corolla with the new intake system. Here’s how:

  • Take your vehicle for a short drive to assess performance.
  • Monitor the engine performance and throttle response.
  • Check for any leaks or issues during the drive.

Maintenance Tips

To keep your HKS high-flow intake performing at its best, consider the following maintenance tips:

  • Regularly inspect the intake for dirt and debris.
  • Clean the filter as recommended by the manufacturer.
  • Check connections and fittings periodically to ensure they remain secure.

Conclusion

Installing an HKS high-flow intake on your GR Corolla G16E-GTS can significantly enhance performance and driving experience. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of improved airflow and engine response.