How to Install Kw V3 Coilovers on Your Brz Fa20 for Better Handling and Performance

by

Installing KW V3 coilovers on your BRZ FA20 can significantly enhance handling and performance. This guide will walk you through the steps to achieve a successful installation.

What You Will Need

  • KW V3 coilover kit
  • Jack and jack stands
  • Socket set
  • Torque wrench
  • Spring compressors
  • Pliers
  • Flathead screwdriver
  • Safety glasses
  • Mechanic gloves

Preparation Steps

Before beginning the installation process, ensure your workspace is safe and organized. Follow these preparation steps:

  • Park your BRZ on a flat surface.
  • Engage the parking brake.
  • Gather all tools and parts needed for the installation.
  • Put on safety glasses and mechanic gloves.

Removing the Stock Suspension

To install the KW V3 coilovers, you must first remove the stock suspension components. Follow these steps:

  • Use the jack to lift the front of the car and secure it with jack stands.
  • Remove the front wheels using a socket set.
  • Disconnect the brake line from the strut using pliers.
  • Remove the bolts securing the strut to the hub assembly.
  • Unbolt the strut from the top mount in the engine bay.
  • Carefully remove the strut from the vehicle.
  • Repeat the process for the rear suspension, lifting the rear of the car and removing the rear wheels.

Preparing the KW V3 Coilovers

Once the stock suspension is removed, it’s time to prepare your KW V3 coilovers for installation:

  • Assemble the coilover components according to the manufacturer’s instructions.
  • Use spring compressors to compress the springs if necessary.
  • Set the desired height adjustments on the coilovers.

Installing the KW V3 Coilovers

With the coilovers prepared, you can now install them on your BRZ:

  • Insert the front coilovers into the strut tower and secure them with the top mount bolts.
  • Reattach the strut to the hub assembly using the bolts removed earlier.
  • Reconnect the brake line to the strut.
  • Repeat the installation for the rear coilovers, ensuring they are secured properly.

Final Adjustments

After installing the coilovers, it’s essential to make final adjustments:

  • Lower the car back to the ground and remove the jack stands.
  • Check the ride height and make any necessary adjustments.
  • Ensure all bolts are tightened to the manufacturer’s torque specifications.
  • Test the suspension by pushing down on each corner of the car.

Testing Your Installation

After completing the installation and adjustments, take your BRZ for a test drive:

  • Drive at low speeds to ensure everything feels stable.
  • Gradually increase speed and test handling in turns.
  • Listen for any unusual noises that may indicate a problem.

Conclusion

Installing KW V3 coilovers on your BRZ FA20 can greatly improve your vehicle’s handling and performance. By following these steps, you can ensure a successful installation and enjoy the benefits of enhanced driving dynamics.