Table of Contents
The Mercedes AMG GLC 63 S is a powerful vehicle, but enthusiasts often seek ways to enhance its performance further. One of the most effective upgrades is installing a performance exhaust system. This guide will walk you through the process step-by-step, focusing on achieving a 20 horsepower increase.
Tools and Materials Needed
- Socket wrench set
- Torque wrench
- Jack and jack stands
- Performance exhaust kit
- Safety goggles
- Gloves
- Cutting tool (if necessary)
Before starting, ensure you have all the necessary tools and materials. This will streamline the installation process and minimize interruptions.
Preparation Steps
Before you begin the installation, it’s crucial to prepare your vehicle. Follow these steps:
- Park the vehicle on a flat surface.
- Engage the parking brake.
- Disconnect the battery to avoid any electrical issues.
- Lift the vehicle using a jack and secure it with jack stands.
Removing the Stock Exhaust System
With the vehicle prepared, you can now remove the stock exhaust system. Follow these steps carefully:
- Locate the exhaust hangers and remove them using the socket wrench.
- Unbolt the exhaust pipes from the headers using the appropriate socket.
- If necessary, cut the exhaust pipes to remove the stock system.
- Carefully take out the entire exhaust system from the vehicle.
Installing the Performance Exhaust System
Now that the stock exhaust is removed, it’s time to install the performance exhaust system. Follow these steps:
- Position the new exhaust system under the vehicle.
- Align the exhaust pipes with the headers and attach them using the bolts.
- Ensure all connections are secure and properly aligned.
- Reinstall the exhaust hangers to secure the system in place.
Finalizing the Installation
Once the performance exhaust system is installed, it’s essential to finalize the installation. Follow these steps:
- Double-check all bolts and connections for tightness.
- Reconnect the battery.
- Start the vehicle and listen for any unusual noises.
- Check for exhaust leaks around the joints.
Testing Performance Improvements
After installation, it’s important to test the vehicle’s performance. Here’s how:
- Take the vehicle for a short drive to ensure everything is functioning correctly.
- Monitor the engine’s response and acceleration.
- Consider using a dynamometer to measure horsepower gains.
Maintenance Tips
To ensure your performance exhaust system continues to operate effectively, follow these maintenance tips:
- Regularly check for loose bolts and connections.
- Inspect for any signs of rust or damage.
- Clean the exhaust tips to maintain appearance.
With proper installation and maintenance, your Mercedes AMG GLC 63 S will enjoy enhanced performance and a thrilling driving experience. Enjoy your new power and sound!