Table of Contents
The Stillen Q50 Red Sport Exhaust system is a popular upgrade for enthusiasts looking to enhance their vehicle’s performance and sound. This guide will walk you through the installation process, ensuring you can achieve an impressive 25 horsepower increase while enjoying a more aggressive exhaust note.
Tools and Materials Needed
- Socket wrench set
- Torque wrench
- Jack and jack stands
- Safety glasses
- Gloves
- Stillen Q50 Red Sport Exhaust system
- Exhaust hangers (if not included)
Before starting the installation, gather all necessary tools and materials. Ensure you have a clean workspace and take safety precautions to protect yourself during the process.
Preparation
Before you begin, it’s essential to prepare your vehicle properly. Follow these steps:
- Park your vehicle on a level surface.
- Engage the parking brake.
- Disconnect the battery to prevent any electrical issues.
- Raise the vehicle using the jack and secure it with jack stands.
Removing the Stock Exhaust System
To install the Stillen exhaust, you must first remove the stock exhaust system. Follow these steps:
- Locate the exhaust clamps and bolts securing the stock exhaust.
- Using your socket wrench, remove the clamps and bolts.
- Carefully slide the stock exhaust off the hangers.
- If needed, use lubricant to help loosen the hangers.
Once the stock exhaust is removed, inspect the exhaust hangers and replace them if they are worn or damaged.
Installing the Stillen Q50 Red Sport Exhaust
With the stock exhaust out of the way, you can now install the Stillen Q50 Red Sport Exhaust. Follow these steps:
- Begin by positioning the Stillen exhaust system under the vehicle.
- Align the exhaust pipes with the exhaust hangers.
- Slide the exhaust into place, ensuring a snug fit.
- Reattach the exhaust clamps and bolts using your socket wrench.
- Torque the bolts to the manufacturer’s specifications for a secure fit.
Ensure all connections are tight and that the exhaust is properly aligned to avoid any rattling or misalignment during operation.
Final Steps
After installing the Stillen exhaust, follow these final steps:
- Reconnect the battery, ensuring all connections are secure.
- Lower the vehicle from the jack stands.
- Start the engine and listen for any unusual sounds.
- Check for leaks around the exhaust connections.
Once you have verified everything is functioning correctly, take your vehicle for a test drive to experience the new sound and power.
Conclusion
Installing the Stillen Q50 Red Sport Exhaust can significantly enhance your vehicle’s performance and sound. By following these steps, you can achieve a successful installation and enjoy the benefits of increased horsepower and an aggressive exhaust note.