Table of Contents
Upgrading your vehicle’s spark coils can lead to significant performance enhancements. In this article, we will guide you through the process of installing Taylor Spark Coils, which can boost your engine’s horsepower by 10-12 HP for an affordable price of around $150.
Understanding Spark Coils
Spark coils are essential components in your vehicle’s ignition system. They transform the battery’s low voltage into the high voltage needed to ignite the air-fuel mixture in the engine’s cylinders.
Upgrading to high-performance spark coils, such as those offered by Taylor, can improve combustion efficiency, resulting in better engine performance and fuel economy.
Tools and Materials Needed
- Taylor Spark Coils
- Socket set
- Torque wrench
- Screwdriver set
- Shop towel
- Safety glasses
Step-by-Step Installation Guide
Step 1: Prepare Your Vehicle
Before starting, ensure your vehicle is parked on a flat surface and the engine is cool. Disconnect the battery to prevent any electrical issues during the installation process.
Step 2: Remove the Engine Cover
If your vehicle has an engine cover, use the appropriate socket to remove it. This will give you access to the ignition coils.
Step 3: Locate the Spark Coils
Identify the spark coils on your engine. They are typically located on top of the engine, near the cylinder head. Each coil is connected to a spark plug.
Step 4: Disconnect the Old Coils
Carefully disconnect the electrical connector from each spark coil. You may need to press a tab or lift a lever to release the connector.
Step 5: Remove the Old Spark Coils
Using the socket set, remove the bolts securing the old spark coils. Once the bolts are removed, gently pull the coils out of the ignition system.
Step 6: Install the Taylor Spark Coils
Take the new Taylor Spark Coils and insert them into the same position as the old ones. Ensure they fit snugly into the ignition system.
Step 7: Secure the New Coils
Using the torque wrench, secure the new coils with the appropriate bolts. Be sure to follow the manufacturer’s specifications for torque settings.
Step 8: Reconnect the Electrical Connectors
Reconnect the electrical connectors to each spark coil. Ensure that they click into place securely.
Step 9: Replace the Engine Cover
Once all coils are installed and connected, replace the engine cover and secure it with the bolts you removed earlier.
Step 10: Reconnect the Battery
Reconnect the battery terminals, ensuring they are tight and secure. This completes the installation process.
Testing Your Upgrade
After installing the Taylor Spark Coils, it’s essential to test your vehicle to ensure everything is functioning correctly. Start the engine and listen for any irregular sounds. Additionally, take your vehicle for a short drive to feel the performance improvements.
Conclusion
Installing Taylor Spark Coils is a cost-effective upgrade that can significantly enhance your vehicle’s performance. With just a few tools and some time, you can achieve a boost of 10-12 HP. Enjoy the improved driving experience and the satisfaction of having completed the installation yourself!