Table of Contents
Installing the Akrapovic Evolution Exhaust on your Audi R8 can significantly enhance its performance and sound. This step-by-step tutorial will guide you through the installation process to ensure a successful upgrade.
Tools and Materials Needed
- Akrapovic Evolution Exhaust System
- Socket set
- Torque wrench
- Jack and jack stands
- Safety glasses
- Gloves
- Heat-resistant spray (optional)
Before you start, make sure you have all the necessary tools and materials ready. This will help streamline the installation process and avoid interruptions.
Preparation
Begin by preparing your workspace. Ensure that your Audi R8 is parked on a flat surface and engage the parking brake. It’s also advisable to wear safety glasses and gloves throughout the installation process.
Lift the Vehicle
Using a jack, lift the rear of the vehicle and secure it with jack stands. This will provide you with ample space to work underneath the car.
Removing the Stock Exhaust
Start by locating the stock exhaust system. You will need to remove the rear diffuser and any other components blocking access to the exhaust.
Disconnecting the Exhaust
Loosen and remove the bolts connecting the exhaust to the headers using a socket set. Carefully detach the exhaust from the hangers and remove it from the vehicle.
Installing the Akrapovic Exhaust
Once the stock exhaust is removed, it’s time to install the Akrapovic Evolution Exhaust. Begin by positioning the new exhaust system under the vehicle.
Connecting the Exhaust
Align the Akrapovic exhaust with the headers and secure it using the provided bolts. Make sure to tighten them to the manufacturer’s specifications using a torque wrench.
Securing the Hangers
Attach the exhaust hangers to their respective mounting points. Ensure that everything is aligned correctly and securely fastened.
Final Steps
After the exhaust is installed, double-check all connections and fittings to ensure everything is secure. Reinstall any components that were removed during the process, including the rear diffuser.
Lower the Vehicle
Carefully lower the vehicle back to the ground using the jack. Once it’s on the ground, remove the jack stands.
Testing the Installation
Start the engine and listen for any unusual sounds. The Akrapovic Evolution Exhaust should produce a deep, aggressive tone. Check for any leaks around the connections and ensure that everything is functioning properly.
Final Inspection
Perform a final inspection of the exhaust system after a short drive. Make sure all components remain secure and that there are no signs of wear or damage.
Conclusion
Installing the Akrapovic Evolution Exhaust on your Audi R8 can greatly enhance its performance and sound. By following this step-by-step guide, you can ensure a smooth installation process and enjoy the benefits of your new exhaust system.