Table of Contents
The AMS Performance Turbo Kit is a popular upgrade for the Mitsubishi Lancer Evolution X, providing significant power gains and improved performance. This guide will walk you through the steps to install the turbo kit effectively.
Tools and Materials Needed
- AMS Performance Turbo Kit
- Socket set
- Wrenches
- Screwdrivers
- Torque wrench
- Oil catch can
- Coolant
- New gaskets
- Zip ties
- Safety goggles
- Gloves
Preparation
Before starting the installation, ensure that your vehicle is parked on a flat surface and the engine is cool. Gather all your tools and materials. It’s advisable to wear safety goggles and gloves throughout the process to protect yourself.
Step-by-Step Installation
Step 1: Remove the Stock Turbo
Begin by disconnecting the battery to prevent any electrical issues. Next, remove the engine cover and intake piping to access the turbo. Disconnect the exhaust downpipe and any associated sensors. Unbolt the stock turbo and remove it from the vehicle.
Step 2: Install the New Turbo
Take the AMS turbo and position it in place of the stock turbo. Ensure that all mounting points align correctly. Use new gaskets to prevent leaks and bolt the turbo securely. Reconnect the exhaust downpipe and any sensors that were previously disconnected.
Step 3: Connect the Oil and Coolant Lines
Connect the oil feed line to the new turbo, ensuring it is tight and secure. Next, attach the coolant lines, making sure there are no kinks or leaks. Check all connections twice to ensure they are properly fitted.
Step 4: Install the Intake and Intercooler Piping
Install the new intake piping that comes with the AMS kit. Make sure all clamps are tightened. Connect the intercooler piping, ensuring that there are no leaks. Use zip ties to secure any loose wiring or hoses to prevent interference with moving parts.
Step 5: Reconnect the Battery
Once everything is installed, reconnect the battery. Double-check all connections and fittings to ensure everything is secure. It’s crucial to verify that nothing is loose before starting the engine.
Final Checks
Start the engine and let it idle for a few minutes. Check for any leaks in the oil and coolant lines. Listen for any unusual noises that may indicate a problem. If everything sounds and looks good, take the car for a short test drive to ensure the turbo is functioning correctly.
Conclusion
Installing the AMS Performance Turbo Kit on your Evo X can significantly enhance your vehicle’s performance. By following this guide and taking your time, you can achieve a successful installation. Always consult with a professional if you are unsure about any steps in the process.