Table of Contents
The Subaru WRX is known for its impressive performance, but many enthusiasts seek to enhance their driving experience even further. One popular upgrade is the installation of the Cobb Tuning VF48 Turbo. This article will guide you through the process of installing the VF48 Turbo on your WRX, helping you boost your horsepower from stock to an exhilarating 330 HP.
Understanding the VF48 Turbo
The VF48 Turbo is designed to improve the efficiency and power output of your WRX. It offers a significant increase in airflow and spool time, allowing for quicker acceleration and a more thrilling driving experience.
Tools and Materials Needed
- Socket set
- Torque wrench
- Screwdrivers (flathead and Phillips)
- Wrenches
- New gaskets
- VF48 Turbocharger
- Oil feed and drain lines
- Intercooler piping (if necessary)
- Access to a lift or jack stands
Preparation Steps
Before starting the installation, it’s essential to prepare your vehicle and workspace. Follow these steps:
- Ensure the vehicle is parked on a level surface.
- Disconnect the battery to prevent any electrical issues.
- Allow the engine to cool completely.
Removing the Stock Turbo
To install the VF48 Turbo, you must first remove the stock turbo. Follow these steps:
- Remove the air intake system to gain access to the turbo.
- Disconnect the exhaust downpipe from the stock turbo.
- Unbolt the turbo from the exhaust manifold.
- Disconnect the oil feed and drain lines from the stock turbo.
- Carefully remove the stock turbo from the engine bay.
Installing the VF48 Turbo
With the stock turbo removed, it’s time to install the VF48 Turbo. Follow these steps:
- Position the VF48 Turbo in place, aligning it with the exhaust manifold.
- Secure the turbo using the appropriate bolts and torque them to the manufacturer’s specifications.
- Reconnect the oil feed and drain lines, ensuring they are properly sealed.
- If necessary, install new intercooler piping to accommodate the VF48 Turbo.
- Reconnect the exhaust downpipe to the turbo.
Final Steps
After successfully installing the VF48 Turbo, complete the following steps:
- Reinstall the air intake system.
- Reconnect the battery.
- Start the engine and allow it to idle, checking for any leaks.
- Take the vehicle for a test drive to ensure everything is functioning correctly.
Tuning Your WRX
After installation, it’s crucial to tune your WRX to maximize the performance of the VF48 Turbo. A proper tune will ensure your engine runs efficiently and safely at the new power levels.
Conclusion
Installing the Cobb Tuning VF48 Turbo on your WRX is a rewarding project that can significantly boost your vehicle’s performance. By following these steps and ensuring proper tuning, you can enjoy the thrill of driving a WRX with 330 HP.