How to Install the Coolant-integrated Aps Gt-r Intercooler for Improved Performance

by

Installing a coolant-integrated APS GT-R intercooler can significantly enhance your vehicle’s performance. This guide will walk you through the steps required for a successful installation, ensuring that you maximize your vehicle’s potential.

Tools and Materials Needed

  • APS GT-R intercooler kit
  • Socket set
  • Wrenches
  • Torque wrench
  • Coolant
  • Hoses and clamps
  • Safety glasses
  • Gloves
  • Shop towels

Preparation Steps

Before starting the installation process, it’s essential to prepare your workspace and vehicle. Follow these preparation steps:

  • Ensure the vehicle is parked on a flat surface.
  • Disconnect the battery to avoid any electrical issues.
  • Drain the existing coolant from the system.
  • Remove any components that may obstruct access to the intercooler area.

Removing the Old Intercooler

To install the new APS GT-R intercooler, you must first remove the existing intercooler. Follow these steps:

  • Locate the old intercooler, typically found in the front of the vehicle.
  • Disconnect the piping connected to the old intercooler.
  • Unbolt the intercooler from its mounting points.
  • Carefully remove the intercooler from the vehicle.

Installing the APS GT-R Intercooler

With the old intercooler removed, you can now install the new APS GT-R intercooler. Follow these steps for proper installation:

  • Position the new APS GT-R intercooler in the mounting location.
  • Secure the intercooler using the provided bolts and a torque wrench.
  • Reconnect the piping to the intercooler, ensuring a tight fit.
  • Install any additional components included in the kit.

Connecting the Coolant System

Integrating the coolant system is a crucial step for optimal performance. Follow these steps:

  • Attach the coolant hoses to the intercooler as per the manufacturer’s instructions.
  • Ensure all clamps are secure and leak-free.
  • Refill the coolant system with the appropriate coolant mixture.
  • Bleed the system to remove any air pockets.

Final Checks and Testing

After installation, perform the following checks before starting the vehicle:

  • Double-check all connections and bolts for tightness.
  • Inspect for any potential coolant leaks.
  • Reconnect the battery.
  • Start the vehicle and allow it to reach operating temperature while monitoring the coolant level.

Conclusion

Installing the coolant-integrated APS GT-R intercooler can greatly improve your vehicle’s performance. By following these steps carefully, you can ensure a successful installation that enhances your driving experience.