Table of Contents
The Eventuri intake system is a popular upgrade for the S65 engine, known for its performance benefits and enhanced engine sound. This guide will walk you through the installation process step-by-step, ensuring you can successfully upgrade your engine’s intake system.
Tools and Materials Needed
- Eventuri intake kit
- Socket set
- Torque wrench
- Screwdriver set
- Plastic trim removal tools
- Shop towels
- Safety glasses
Preparation Steps
Before beginning the installation, ensure that your vehicle is parked on a flat surface and that the engine is cool. Gather all the necessary tools and materials to streamline the process.
Safety Precautions
Always wear safety glasses when working on your vehicle. Ensure the battery is disconnected to prevent any electrical issues during the installation.
Removing the Stock Intake
To install the Eventuri intake, you first need to remove the factory intake system. Follow these steps:
- Open the hood and locate the stock intake components.
- Disconnect the mass air flow (MAF) sensor by gently pulling on the connector.
- Loosen the hose clamps securing the intake tubes using a socket or screwdriver.
- Remove the intake tubes and airbox carefully, ensuring no components are damaged.
- Clean the area where the new intake will be installed to ensure a proper fit.
Installing the Eventuri Intake
With the stock intake removed, you can now proceed with the installation of the Eventuri intake system. Follow these steps:
- Begin by placing the Eventuri airbox in the designated area.
- Secure the airbox using the provided mounting hardware, tightening to the manufacturer’s specifications.
- Install the silicone couplers onto the throttle bodies and secure them with the provided clamps.
- Attach the Eventuri intake tubes to the airbox and throttle bodies, ensuring a snug fit.
- Reconnect the MAF sensor to the new intake system.
Final Steps
After the Eventuri intake is installed, it’s important to double-check all connections and ensure everything is secure. Follow these final steps:
- Inspect all hose clamps and connections for tightness.
- Reconnect the vehicle’s battery.
- Start the engine and listen for any unusual sounds.
- Check for any warning lights on the dashboard.
- Take the car for a short drive to ensure proper functionality.
Conclusion
Installing the Eventuri intake on your S65 engine can significantly enhance performance and sound. By following this detailed guide, you should be able to complete the installation successfully. Always refer to the manufacturer’s instructions for specific torque settings and additional information.