Table of Contents
Installing a Garrett GTX2867R turbo on your Audi TT can significantly enhance its performance. This guide provides step-by-step instructions to help you through the installation process.
Tools and Materials Needed
- Garrett GTX2867R turbocharger
- Turbo installation kit
- Socket set
- Wrenches
- Torque wrench
- Silicone couplers
- Boost gauge
- Oil line fittings
- Coolant line fittings
- Gasket maker
Preparation Steps
Before starting the installation, ensure you have all the necessary tools and materials. It’s also important to work in a well-ventilated area and wear safety gear.
1. Disconnect the Battery
To begin, disconnect the negative terminal of the battery to prevent any electrical issues during the installation.
2. Remove the Engine Cover
Next, remove the engine cover by unscrewing the bolts that hold it in place. Set it aside in a safe location.
3. Remove the Stock Turbo
Carefully disconnect the intake and exhaust pipes from the stock turbo. Remove any clamps and bolts securing the turbo to the manifold and exhaust system.
4. Prepare the New Turbo
Before installing the new Garrett GTX2867R turbo, ensure it is clean and free of debris. Attach any necessary fittings for oil and coolant lines.
Installation Steps
1. Install the New Turbo
Position the Garrett GTX2867R turbo in place and secure it using the bolts from the stock turbo. Make sure to follow the manufacturer’s torque specifications.
2. Connect the Oil and Coolant Lines
Attach the oil and coolant lines to the turbo. Ensure all connections are tight and leak-free to prevent any operational issues.
3. Reconnect the Exhaust and Intake Pipes
Reattach the exhaust and intake pipes to the new turbo. Use new clamps if necessary to ensure a secure fit.
4. Install the Boost Gauge
To monitor the performance of your new turbo, install a boost gauge. Follow the manufacturer’s instructions for proper installation.
Final Steps
1. Reconnect the Battery
Once everything is securely in place, reconnect the negative terminal of the battery.
2. Start the Engine
Start the engine and allow it to idle for a few minutes. Check for any leaks around the turbo and connections.
3. Test Drive
After confirming there are no leaks, take your Audi TT for a test drive. Monitor the boost gauge to ensure the turbo is functioning correctly.
Conclusion
Installing a Garrett GTX2867R turbo on your Audi TT can enhance your driving experience significantly. By following these step-by-step instructions, you can ensure a successful installation and enjoy the benefits of increased power and performance.