Table of Contents
The Dodge Viper ACR is already a powerful machine, but for those seeking to elevate performance even further, the HPE500 Supercharger offers an impressive boost of 150 horsepower. This guide will walk you through the installation process step by step, ensuring you can maximize your Viper’s potential.
Tools and Materials Needed
- HPE500 Supercharger Kit
- Socket set
- Torque wrench
- Ratchet and extensions
- Wrenches
- Flathead screwdriver
- Phillips screwdriver
- Coolant
- Oil
- Shop towels
- Safety glasses
- Gloves
Preparation Steps
Before you dive into the installation, it’s important to prepare your workspace and the vehicle. Follow these steps to ensure a smooth process.
- Park the Dodge Viper ACR on a flat surface and engage the parking brake.
- Disconnect the battery to prevent any electrical issues during installation.
- Gather all tools and materials in your workspace for easy access.
- Read through the HPE500 Supercharger installation manual thoroughly.
Removing the Stock Components
The first major step in the installation process is to remove the stock components that will be replaced by the supercharger system.
- Remove the engine cover by unscrewing the bolts securing it in place.
- Disconnect the air intake and remove the stock intake manifold.
- Take off the throttle body, ensuring to keep the gasket intact for reuse.
- Drain the coolant from the engine to prevent spills during installation.
Installing the HPE500 Supercharger
With the stock components removed, you can now proceed to install the HPE500 Supercharger. Follow these steps carefully.
- Place the supercharger onto the engine block, aligning it with the mounting points.
- Secure the supercharger using the provided bolts, tightening them to the specified torque settings from the manual.
- Reattach the throttle body to the supercharger, ensuring that the gasket is properly positioned.
- Install the new intake system that comes with the HPE500 kit, connecting it to the supercharger.
Connecting the Cooling System
Proper cooling is essential for the supercharger to function effectively. Follow these steps to connect the cooling system.
- Reconnect the coolant lines to the supercharger, ensuring a tight fit to prevent leaks.
- Refill the coolant reservoir with the appropriate coolant mixture.
- Check for any leaks around the connections and tighten as necessary.
Final Steps and Testing
With the supercharger installed and the cooling system connected, it’s time to finalize the installation and test the vehicle.
- Reconnect the battery and start the engine, allowing it to idle for a few minutes.
- Check for any unusual noises or leaks during idle.
- Take the vehicle for a test drive, gradually increasing speed to ensure the supercharger is functioning properly.
- Monitor the engine temperature and performance during the test drive.
Conclusion
Installing the HPE500 Supercharger on your Dodge Viper ACR can significantly enhance its performance, delivering an extra 150 horsepower. By following this guide, you can ensure a successful installation and enjoy the thrilling power boost that comes with it. Always remember to consult the installation manual for specific details and torque specifications.