Table of Contents
The Mini Cooper S is known for its sporty performance and agile handling. One way to enhance its power and efficiency is by installing the HPS Performance Intake system. This guide will walk you through the installation process step-by-step, ensuring you achieve optimal performance from your vehicle.
Tools and Materials Required
- HPS Performance Intake Kit
- Socket wrench set
- Flathead screwdriver
- Phillips screwdriver
- Torque wrench
- Ratchet extension
- Shop towels
- Safety glasses
Before starting the installation, make sure you have all the necessary tools and materials ready. This will help streamline the process and avoid interruptions.
Preparation Steps
Begin by preparing your workspace and the vehicle. Follow these steps to ensure a smooth installation:
- Park your Mini Cooper S on a flat surface and engage the parking brake.
- Disconnect the negative terminal of the battery to prevent any electrical issues.
- Allow the engine to cool down if it was recently used.
Removing the Stock Intake System
The next step is to remove the factory intake system. This involves several components, so follow these instructions carefully:
- Locate the air intake box on the engine bay.
- Use a flathead screwdriver to loosen the clamps securing the intake hose.
- Disconnect the intake hose from the throttle body.
- Remove any screws or bolts securing the air intake box using the socket wrench.
- Carefully lift the air intake box out of the engine bay.
- Disconnect any electrical connectors attached to the mass airflow sensor.
Once the stock intake system is removed, inspect the area for any debris or dirt. Clean the surrounding area to ensure a proper fit for the new intake.
Installing the HPS Performance Intake
Now that the stock system is out, you can proceed with installing the HPS Performance Intake. Follow these steps:
- Take the HPS intake pipe and connect it to the throttle body. Ensure it fits snugly.
- Secure the intake pipe using the provided clamps.
- Install the HPS air filter onto the intake pipe, making sure it’s properly seated.
- Reconnect the mass airflow sensor to the intake pipe, ensuring a tight connection.
- Position the intake system in the engine bay and secure it with the supplied hardware.
After securing the intake, double-check all connections and ensure everything is tightened to the manufacturer’s specifications. This will prevent any leaks or performance issues.
Final Steps
With the HPS Performance Intake installed, it’s time to wrap up the installation process:
- Reconnect the negative terminal of the battery.
- Start the engine and let it idle for a few minutes to ensure everything is functioning correctly.
- Check for any unusual sounds or leaks around the intake area.
- Take the Mini Cooper S for a test drive to experience the improved performance.
After the test drive, if everything is running smoothly, you have successfully installed the HPS Performance Intake on your Mini Cooper S!
Maintenance Tips
To ensure your new intake system continues to perform well, consider these maintenance tips:
- Regularly check the air filter and clean or replace it as needed.
- Inspect all connections and clamps periodically for tightness.
- Monitor engine performance and fuel efficiency for any changes.
By following these steps and tips, you can enjoy enhanced performance from your Mini Cooper S with the HPS Performance Intake system.