Table of Contents
The Subaru BRZ is a popular sports car known for its lightweight design and agile handling. For those looking to enhance their vehicle’s performance, the Perrin Power Pack is an excellent option. This article provides a detailed step-by-step guide on how to install the Perrin Power Pack on your Subaru BRZ, along with a cost breakdown.
What is the Perrin Power Pack?
The Perrin Power Pack is a comprehensive performance upgrade kit designed specifically for the Subaru BRZ. It includes essential components that work together to improve the engine’s efficiency and power output. The kit typically consists of:
- Cold Air Intake
- Cat-Back Exhaust System
- ECU Tune
- Upgraded Fuel Pump
Tools and Materials Needed
Before starting the installation, gather the following tools and materials:
- Socket set
- Torque wrench
- Flathead screwdriver
- Phillips screwdriver
- Pliers
- Ratcheting wrench
- Shop towels
- Safety glasses
Step-by-Step Installation Guide
Step 1: Prepare Your Vehicle
Begin by parking your Subaru BRZ on a level surface and ensuring the engine is cool. Disconnect the negative battery terminal to prevent any electrical issues during installation.
Step 2: Remove the Stock Intake
Using a socket set, remove the screws holding the stock air intake in place. Carefully detach the intake tube from the throttle body and remove the entire assembly. Set it aside for future use if needed.
Step 3: Install the Perrin Cold Air Intake
Position the Perrin cold air intake in place, ensuring it aligns with the throttle body. Secure it using the provided clamps and screws. Make sure all connections are tight to avoid any air leaks.
Step 4: Replace the Exhaust System
Next, lift the car with jack stands for safe access to the exhaust system. Remove the stock cat-back exhaust by unbolting it from the mid-pipe. Install the Perrin cat-back exhaust system, ensuring all hangers are properly aligned and secured.
Step 5: Install the Upgraded Fuel Pump
To install the upgraded fuel pump, access the fuel tank by removing the rear seat. Disconnect the battery again for safety. Remove the old fuel pump assembly and replace it with the Perrin upgraded fuel pump, making sure to reconnect all lines securely.
Step 6: ECU Tune Installation
Follow the manufacturer’s instructions to install the ECU tune. This step is crucial for optimizing your vehicle’s performance after the hardware upgrades. Ensure you have the proper software and connections to complete this step successfully.
Step 7: Reconnect the Battery
Once all components are installed, reconnect the negative battery terminal. Start the engine and let it idle for a few minutes to ensure everything is functioning correctly.
Cost Breakdown
Understanding the costs associated with the installation of the Perrin Power Pack can help you budget effectively. Here’s a general breakdown:
- Perrin Cold Air Intake: $300
- Perrin Cat-Back Exhaust: $600
- Perrin Upgraded Fuel Pump: $200
- ECU Tune: $500
- Installation Tools (if needed): $150
- Total Estimated Cost: $1,800
Conclusion
Installing the Perrin Power Pack on your Subaru BRZ can significantly enhance its performance. By following this step-by-step guide, you can achieve a successful installation and enjoy the benefits of your upgraded vehicle. Always remember to drive safely and responsibly after modifications.