Table of Contents
The PZERO Performance Intake is a popular upgrade for the CLA45 AMG, enhancing throttle response and overall engine performance. This guide will walk you through the installation process step by step.
Tools and Materials Needed
- Socket set
- Torque wrench
- Screwdrivers (flathead and Phillips)
- PZERO Performance Intake Kit
- Shop towels
Preparation Steps
Before starting the installation, ensure that your vehicle is parked on a flat surface and the engine is cool. Gather all necessary tools and materials to streamline the process.
Disconnect the Battery
Begin by disconnecting the negative terminal of the battery to prevent any electrical shorts during the installation.
Remove the Engine Cover
Using a socket wrench, remove the bolts securing the engine cover. Carefully lift the cover off and set it aside.
Removing the Stock Intake
With the engine cover removed, you can now access the stock intake system. Follow these steps to remove it.
Loosen the Hose Clamps
Locate the hose clamps that secure the stock intake to the throttle body and airbox. Use a screwdriver to loosen them.
Disconnect the Intake Hoses
Carefully pull the intake hoses away from the throttle body and airbox. Ensure that no debris falls into the engine.
Remove the Stock Intake
Once the hoses are disconnected, remove any additional bolts or clips securing the stock intake. Lift it out and set it aside.
Installing the PZERO Performance Intake
Now it’s time to install the PZERO Performance Intake. Follow these steps carefully.
Position the New Intake
Align the PZERO Performance Intake with the throttle body and airbox. Ensure it fits snugly in place.
Secure the Intake
Using the provided hardware, secure the new intake in place. Tighten all bolts to the manufacturer’s specifications using a torque wrench.
Reconnect the Intake Hoses
Reconnect the intake hoses to the throttle body and airbox. Tighten the hose clamps securely.
Final Steps
With the new intake installed, it’s time to reassemble everything and finalize the installation.
Reinstall the Engine Cover
Place the engine cover back on and secure it with the bolts you removed earlier.
Reconnect the Battery
Reconnect the negative terminal of the battery. Ensure it is tight and secure.
Testing the Installation
Start your engine and let it idle for a few minutes. Check for any unusual sounds or leaks. Take your CLA45 AMG for a test drive to experience the improved throttle response.
Conclusion
Installing the PZERO Performance Intake on your CLA45 AMG is a straightforward process that can significantly enhance your vehicle’s performance. With improved throttle response, you’ll enjoy a more engaging driving experience.