Table of Contents
Installing side skirts on your vehicle can enhance its appearance and improve aerodynamics. To ensure a perfect fit, accurate measurements are essential. This guide will walk you through the proper steps to measure your vehicle for side skirts.
Tools Needed for Accurate Measurement
- Measuring tape or ruler
- Masking tape
- Marker or chalk
- Helper (optional but recommended)
Steps to Measure Your Vehicle
1. Prepare Your Vehicle
Park your vehicle on a flat, level surface. Ensure the vehicle is turned off and cool. Clean the side panels where the side skirts will be installed to remove dirt and debris.
2. Mark the Measurement Points
Use masking tape and a marker to mark the points where the side skirts will attach. Typically, these are along the bottom edge of the vehicle’s side panels, from the front wheel well to the rear wheel well.
3. Measure the Length
Using the measuring tape, measure the distance from the front attachment point to the rear attachment point. Record this measurement accurately. It helps ensure the side skirt will span the entire length without gaps.
4. Measure the Height and Clearance
Measure the height from the ground to the bottom of the vehicle’s side panel at several points along the length. This ensures the side skirt will fit snugly without interfering with tires or other components.
Additional Tips for Precise Fitting
- Take multiple measurements at different points to account for any irregularities.
- Double-check your measurements before ordering or cutting.
- Consult the side skirt manufacturer’s specifications for fitting guidelines.
- Ask a helper to hold the tape for more accuracy.
By carefully measuring your vehicle, you can ensure that your new side skirts will fit perfectly, enhancing both the look and performance of your car. Proper preparation saves time and prevents costly adjustments later.