Table of Contents
The Subaru BRZ is a popular choice for car enthusiasts who appreciate a balanced sports car with a focus on performance and handling. One of the best upgrades you can make to enhance your BRZ’s performance is to install a Greddy exhaust system. This article provides essential installation tips and highlights the power boost you can expect from this modification.
Understanding the Benefits of a Greddy Exhaust System
Upgrading to a Greddy exhaust system can significantly improve your Subaru BRZ’s performance. Here are some key benefits:
- Increased Horsepower: A high-performance exhaust system allows for better airflow, resulting in increased horsepower.
- Improved Sound: Greddy exhaust systems are designed to provide a deeper, more aggressive sound that enhances the driving experience.
- Weight Reduction: Many aftermarket exhaust systems are lighter than stock components, contributing to better handling and performance.
- Enhanced Aesthetics: A Greddy exhaust system adds a sporty look to your vehicle.
Preparation for Installation
Before you start the installation process, it’s crucial to gather all necessary tools and materials. Here’s what you will need:
- Greddy exhaust system kit
- Jack and jack stands
- Wrenches and sockets
- Torque wrench
- Cutting tool (if necessary)
- Safety goggles and gloves
Make sure to work in a well-ventilated area and allow your vehicle to cool down completely before starting the installation.
Step-by-Step Installation Process
Step 1: Raise the Vehicle
Using a jack, lift your Subaru BRZ and secure it with jack stands. Ensure that the vehicle is stable before proceeding.
Step 2: Remove the Stock Exhaust
Locate the stock exhaust system and begin removing it. Start by loosening the bolts that connect the exhaust to the headers and the exhaust hangers. If necessary, use a cutting tool to remove any rusted or damaged sections.
Step 3: Install the Greddy Exhaust System
Position the Greddy exhaust system in place. Begin by attaching the mid-pipe to the headers, followed by the rear section of the exhaust. Ensure that all connections are secure and properly aligned.
Step 4: Tighten All Bolts
Use a torque wrench to tighten all bolts to the manufacturer’s specifications. This ensures a proper seal and prevents exhaust leaks.
Step 5: Recheck Connections
Double-check all connections, ensuring that everything is secure. Pay special attention to the exhaust hangers to prevent any vibrations or rattling.
Step 6: Lower the Vehicle
Carefully lower the vehicle back to the ground using the jack. Ensure that the exhaust system is not touching any other components of the car.
Post-Installation Checks
After installation, it’s important to perform a few checks to ensure everything is functioning correctly:
- Start the engine and listen for any unusual sounds.
- Check for exhaust leaks by inspecting the joints and connections.
- Take the car for a test drive to ensure optimal performance.
Expected Power Boost
Installing a Greddy exhaust system typically results in a noticeable power boost. On average, drivers report an increase of:
- 5-15 horsepower increase, depending on additional modifications.
- Improved throttle response and acceleration.
Conclusion
Upgrading to a Greddy exhaust system can greatly enhance the performance and enjoyment of your Subaru BRZ. By following the installation tips outlined in this article, you can ensure a safe and effective upgrade that will provide lasting benefits. Enjoy the improved sound and performance that comes with your new exhaust system!