Table of Contents
The Hyundai Veloster N is known for its impressive performance and sporty design. However, many enthusiasts seek to enhance its capabilities even further. One of the most effective upgrades is the installation of a MagnaFlow exhaust system, which can provide an additional 15 horsepower. In this article, we will explore the benefits of upgrading your Veloster N with a MagnaFlow exhaust and guide you through the installation process.
Benefits of Installing a MagnaFlow Exhaust
Upgrading to a MagnaFlow exhaust system offers several advantages for Veloster N owners. Here are some key benefits:
- Increased Horsepower: The MagnaFlow exhaust can add up to 15 hp, enhancing the overall performance of your vehicle.
- Improved Sound: The exhaust system provides a deeper, more aggressive sound that enhances the driving experience.
- Weight Reduction: Aftermarket exhaust systems are often lighter than factory options, contributing to better handling.
- Better Exhaust Flow: A performance exhaust promotes improved exhaust flow, which can lead to better throttle response.
- Stylish Appearance: MagnaFlow exhausts often feature polished tips that enhance the aesthetic appeal of the vehicle.
Preparing for Installation
Before you begin the installation process, it’s essential to gather the necessary tools and materials. Here’s what you’ll need:
- Socket set
- Wrench set
- Jack and jack stands
- Torque wrench
- Safety goggles
- Gloves
- MagnaFlow exhaust system specific for Hyundai Veloster N
Step-by-Step Installation Guide
Step 1: Safety First
Ensure you are working in a well-ventilated area. Wear safety goggles and gloves to protect yourself during the installation process.
Step 2: Lift the Vehicle
Using a jack, lift the rear of the vehicle and secure it with jack stands. Make sure the vehicle is stable before proceeding.
Step 3: Remove the Factory Exhaust
Locate the factory exhaust system and use a socket set to remove the bolts connecting it to the exhaust manifold and the hangers. Carefully detach the exhaust system from the vehicle.
Step 4: Prepare the MagnaFlow Exhaust
Unbox the MagnaFlow exhaust system and lay out all components. Ensure you have all necessary parts, including clamps and hangers, before installation.
Step 5: Install the MagnaFlow Exhaust
Begin by attaching the new exhaust system at the exhaust manifold. Use the provided clamps and bolts to secure it in place. Make sure to follow the manufacturer’s instructions for proper alignment and fitment.
Step 6: Secure the Exhaust Hangers
Attach the exhaust hangers to the appropriate mounting points on the vehicle. Ensure that the exhaust is securely mounted and does not touch any other components, which could cause vibrations or noise.
Step 7: Check for Leaks
Once the exhaust is installed, start the engine and listen for any unusual sounds. Check for exhaust leaks around the joints and connections. If everything sounds normal, proceed to the next step.
Step 8: Lower the Vehicle
Carefully lower the vehicle back to the ground using the jack. Remove the jack stands and ensure the vehicle is stable.
Final Thoughts
Installing a MagnaFlow exhaust on your Hyundai Veloster N is a straightforward process that can significantly enhance your vehicle’s performance. With the potential for an additional 15 horsepower, improved sound, and a more aggressive look, this upgrade is a worthy investment for any enthusiast. Always remember to follow safety precautions and consult the manufacturer’s instructions for the best results.