Table of Contents
The Nissan GT-R is a legendary performance car, known for its incredible power and engineering. If you’re looking to squeeze even more horsepower out of your GT-R, consider the TurboSmart Kompact iL Blow-Off Valve (BOV). This upgrade can potentially increase your vehicle’s power by up to 30 HP. In this article, we will guide you through the installation and tuning process of the TurboSmart Kompact iL BOV.
Understanding the Blow-Off Valve
A Blow-Off Valve is an essential component in turbocharged vehicles. It helps manage boost pressure and prevents compressor surge, which can damage your turbo. The TurboSmart Kompact iL BOV is designed for high performance, offering quicker response times and improved reliability.
Benefits of the TurboSmart Kompact iL BOV
- Increased Power: Gain up to 30 HP with improved airflow.
- Enhanced Sound: Enjoy a distinctive and aggressive sound during shifts.
- Durability: Made from high-quality materials for long-lasting performance.
- Easy Installation: Designed for a straightforward installation process.
Tools and Materials Needed
- TurboSmart Kompact iL BOV
- Socket set
- Wrench set
- Phillips screwdriver
- Vacuum hose (if not included)
- Clamps
- Safety glasses
- Gloves
Installation Steps
Step 1: Preparation
Before starting the installation, ensure that your vehicle is parked on a flat surface and the engine is cool. Gather all necessary tools and materials. Put on safety glasses and gloves to protect yourself during the installation.
Step 2: Remove the Factory BOV
Locate the factory Blow-Off Valve on your Nissan GT-R. It is typically found near the turbocharger. Disconnect any hoses connected to the BOV and remove the bolts holding it in place. Carefully take out the factory BOV and set it aside.
Step 3: Install the TurboSmart Kompact iL BOV
Take the TurboSmart Kompact iL BOV and position it where the factory BOV was located. Secure it using the bolts you removed earlier. Ensure that the BOV is tight and properly aligned. Reconnect any hoses or vacuum lines that were disconnected during removal.
Step 4: Check for Leaks
Once the installation is complete, start the engine and let it idle. Check for any air leaks around the BOV. If you notice any hissing sounds or air escaping, turn off the engine and tighten the connections as necessary.
Step 5: Test Drive
After confirming there are no leaks, take your GT-R for a test drive. Pay attention to how the car responds during acceleration and shifting. You should notice a more aggressive sound and improved performance.
Tuning Your GT-R
After installing the TurboSmart Kompact iL BOV, tuning your vehicle is crucial to maximize the performance gains. Proper tuning ensures that your engine runs efficiently and safely with the new BOV.
Step 1: Use a Tuning Software
Utilize a reliable tuning software compatible with your GT-R. This software will allow you to adjust fuel maps, boost levels, and other critical parameters to accommodate the new BOV.
Step 2: Adjust Fuel Maps
With the new BOV, you may need to adjust the fuel maps to ensure optimal air-fuel ratios. Monitor the air intake and make necessary adjustments to prevent running lean or rich.
Step 3: Monitor Boost Levels
After the installation, it’s essential to monitor the boost levels. Ensure that the new BOV is functioning correctly and that the boost pressure is within safe limits. Adjust the boost controller settings if necessary.
Final Thoughts
Upgrading to the TurboSmart Kompact iL BOV is an excellent way to increase your Nissan GT-R’s power and enhance its performance. With proper installation and tuning, you can enjoy the benefits of improved horsepower and a more exhilarating driving experience. Always remember to monitor your vehicle’s performance and make adjustments as needed to maintain optimal operation.