Table of Contents
The Infiniti G35 is a popular choice among car enthusiasts looking to enhance performance. Installing a turbo kit can significantly boost horsepower, allowing you to transform your stock vehicle into a powerhouse. In this guide, we’ll walk you through the steps to install a turbo kit on your G35, aiming for an impressive 300+ horsepower in under 8 hours.
Preparing for the Installation
Before diving into the installation, it’s essential to gather all necessary tools and parts. Proper preparation will ensure a smooth process and help you avoid any interruptions.
- Turbo kit specific to Infiniti G35
- Basic hand tools (wrenches, sockets, screwdrivers)
- Torque wrench
- Oil catch can
- Boost gauge
- Intercooler piping
- Silicone couplers and clamps
Step-by-Step Installation Process
Step 1: Remove the Stock Components
Begin by removing the stock intake and exhaust components. This step is crucial as it clears the way for the turbo kit installation.
- Disconnect the battery.
- Remove the stock intake system.
- Unbolt the exhaust manifold.
- Take out the stock oil pan if necessary.
Step 2: Install the Turbo Manifold
Once the stock components are removed, you can install the turbo manifold. Make sure to use new gaskets to prevent leaks.
- Position the turbo manifold onto the engine.
- Torque the bolts to manufacturer specifications.
- Check for any clearance issues.
Step 3: Mount the Turbocharger
Next, mount the turbocharger onto the manifold. Ensure that it is securely fastened and that all connections are tight.
- Attach the turbocharger to the manifold.
- Secure the oil feed and drain lines.
- Check for any potential leaks.
Step 4: Install the Intercooler
The intercooler is essential for cooling the air before it enters the engine. Proper placement is key to maximizing efficiency.
- Mount the intercooler in the front of the vehicle.
- Connect the intercooler piping.
- Ensure all connections are secure and leak-free.
Step 5: Install the Fuel System Upgrades
To support the increased power, upgrade the fuel system. This step is critical for maintaining engine performance.
- Replace the fuel injectors with higher-capacity ones.
- Install a high-flow fuel pump.
- Ensure proper fuel rail connections.
Step 6: Connect the Electronics
Connecting the electronics is vital for proper turbo operation. This includes the boost controller and any necessary sensors.
- Install the boost gauge inside the vehicle.
- Connect the electronic boost controller.
- Ensure all wiring is secured and protected from heat.
Step 7: Final Checks and Reassembly
Before starting the engine, conduct a final check to ensure everything is installed correctly. Reassemble any components that were removed during the process.
- Double-check all bolts and connections.
- Reinstall the stock intake and any other removed components.
- Reconnect the battery.
Testing and Tuning
Once the installation is complete, it’s time to test the vehicle. Tuning is crucial to ensure optimal performance and reliability.
- Start the engine and let it idle.
- Check for any leaks or unusual noises.
- Take the vehicle for a test drive to monitor performance.
- Consider a professional tune for maximum efficiency.
Conclusion
Installing a turbo kit on your Infiniti G35 can be a rewarding project that significantly enhances your vehicle’s performance. With careful planning and execution, you can achieve over 300 horsepower in under 8 hours. Always remember to prioritize safety and follow up with proper tuning to enjoy the full benefits of your turbocharged G35.