Table of Contents
The Infiniti Q60 is a stunning vehicle that combines luxury with performance. One of the best ways to enhance its power and sound is through a performance exhaust installation. In this article, we will guide you through the process of adding approximately 20 horsepower and achieving an aggressive sound for under $600.
Why Upgrade to a Performance Exhaust?
A performance exhaust system can significantly improve your vehicle’s performance and sound. Here are some reasons why you should consider this upgrade:
- Increased Horsepower: A performance exhaust can boost your engine’s output.
- Better Sound: It enhances the exhaust note, giving your Q60 a more aggressive tone.
- Weight Reduction: Many aftermarket exhausts are lighter than stock systems.
- Improved Fuel Efficiency: A more efficient exhaust flow can lead to better mileage.
Choosing the Right Exhaust System
When selecting a performance exhaust system for your Infiniti Q60, consider the following factors:
- Material: Stainless steel is durable and resistant to corrosion.
- Type: Cat-back systems are popular for their performance gains.
- Sound Level: Choose a system that matches your desired sound profile.
- Brand Reputation: Look for trusted brands with positive reviews.
Tools and Materials Needed
Before you begin the installation, gather the necessary tools and materials:
- Performance exhaust system
- Jack and jack stands
- Socket set
- Wrenches
- Rubber mallet
- Safety glasses
- Gloves
Step-by-Step Installation Guide
Step 1: Prepare Your Vehicle
Park your Infiniti Q60 on a flat surface and engage the parking brake. Use the jack to lift the rear of the vehicle and secure it with jack stands. Ensure you wear safety glasses and gloves throughout the process.
Step 2: Remove the Stock Exhaust
Locate the stock exhaust system and identify the connection points. Use your socket set to remove the bolts securing the exhaust to the exhaust manifold and any hangers. Gently tap the exhaust system with a rubber mallet if it is stuck.
Step 3: Install the Performance Exhaust
Position the new performance exhaust system under the vehicle. Begin by attaching the front section to the exhaust manifold, ensuring proper alignment. Secure it with the provided bolts. Next, attach the mid-pipes and rear section, making sure all hangers are in place.
Step 4: Check for Leaks and Adjustments
Once installed, start the engine and listen for any unusual sounds. Check for exhaust leaks at the connection points. If necessary, make adjustments to the positioning of the exhaust system to eliminate any leaks.
Step 5: Lower the Vehicle
After confirming there are no leaks, carefully lower the vehicle back to the ground. Remove the jack stands and test drive your Infiniti Q60 to experience the enhanced performance and aggressive sound.
Benefits of Performance Exhaust Installation
After completing the installation, you will notice several benefits:
- Enhanced Performance: Feel the increase in horsepower and torque.
- Sportier Sound: Enjoy a more aggressive and sporty exhaust note.
- Improved Aesthetics: A new exhaust can enhance the visual appeal of your vehicle.
- Increased Resale Value: Performance upgrades can add value to your car.
Conclusion
Installing a performance exhaust on your Infiniti Q60 is a rewarding project that can enhance both performance and sound without breaking the bank. With the right tools and a little patience, you can achieve an increase of 20 horsepower and a more aggressive exhaust note for under $600. Enjoy the drive!