Install Guide: Apr Stage 1 Ecu Tune for Infiniti Q60 and Its 70 Hp Enhancement

by

The APR Stage 1 ECU Tune for the Infiniti Q60 offers an impressive enhancement of up to 70 horsepower. This guide will walk you through the installation process step by step, ensuring that you can enjoy the benefits of this performance upgrade safely and effectively.

What You Will Need

  • APR Stage 1 ECU Tune software
  • OBD-II cable
  • Computer or laptop with internet access
  • Battery charger (optional but recommended)
  • Basic hand tools (if necessary)

Preparation Steps

Before starting the installation process, ensure your vehicle is in good working condition. Here are some preparatory steps:

  • Check for any existing engine codes using an OBD-II scanner.
  • Ensure that your car’s battery is fully charged.
  • Make sure your vehicle is parked on a flat surface with the engine off.

Downloading the APR Software

The first step in the installation process is to download the APR Stage 1 ECU Tune software. Follow these steps:

  • Visit the official APR website.
  • Navigate to the ECU tuning section for the Infiniti Q60.
  • Select the Stage 1 ECU Tune option.
  • Create an account or log in if you already have one.
  • Download the software to your computer.

Connecting the OBD-II Cable

With the software downloaded, the next step is to connect the OBD-II cable to your vehicle:

  • Locate the OBD-II port in your Infiniti Q60. It is typically found under the dashboard near the driver’s seat.
  • Plug the OBD-II cable into the port.
  • Connect the other end of the cable to your computer.

Installing the Tune

Now that everything is connected, it’s time to install the APR Stage 1 ECU Tune:

  • Open the APR software on your computer.
  • Follow the on-screen prompts to begin the tuning process.
  • Make sure the vehicle is in the “Run” position but the engine is off.
  • Start the tuning process as prompted by the software.
  • Do not disconnect the OBD-II cable or turn off the vehicle during the installation.
  • Wait for the software to complete the tuning process.

Finalizing the Installation

After the tune has been successfully installed, you need to finalize the process:

  • Disconnect the OBD-II cable from your vehicle and computer.
  • Start your Infiniti Q60 and allow it to idle for a few minutes.
  • Check for any error codes using the OBD-II scanner.
  • Take the vehicle for a test drive to experience the power enhancement.

Troubleshooting Common Issues

If you encounter any issues during the installation, consider the following troubleshooting tips:

  • Ensure that the OBD-II cable is securely connected.
  • Check that your vehicle’s battery is charged and in good condition.
  • Verify that you have downloaded the correct software version for your vehicle.
  • Restart the installation process if it fails initially.

Conclusion

The APR Stage 1 ECU Tune for the Infiniti Q60 is a fantastic way to boost your vehicle’s performance by 70 horsepower. By following this guide, you can complete the installation process with confidence and enjoy the enhanced driving experience that comes with it.