Installation Guide: Adding a Mercedes Amg Glc 63 S Carbon Fiber Aero Kit in 5 Easy Steps

by

The Mercedes AMG GLC 63 S is a high-performance SUV that combines luxury with power. Adding a carbon fiber aero kit not only enhances its aesthetic appeal but also improves aerodynamics. This guide will walk you through the installation process in five easy steps.

Step 1: Gather Your Tools and Materials

Before starting the installation, ensure you have all necessary tools and materials ready. This will make the process smoother and more efficient.

  • Carbon fiber aero kit components
  • Socket wrench set
  • Torque wrench
  • Plastic trim removal tools
  • Cleaning supplies
  • Adhesive promoter

Step 2: Prepare the Vehicle

Preparation is key for a successful installation. Follow these steps to prepare your Mercedes AMG GLC 63 S.

  • Park the vehicle on a level surface.
  • Disconnect the battery to avoid any electrical issues.
  • Clean the areas where the aero kit will be installed.
  • Remove any existing components that will be replaced by the aero kit.

Step 3: Install the Front Splitter

The front splitter is crucial for improving downforce and enhancing the vehicle’s aggressive look. Follow these steps to install it.

  • Align the front splitter with the factory mounting points.
  • Use the socket wrench to secure it in place.
  • Ensure it is tightly fastened, but do not overtighten.
  • Apply adhesive promoter on the edges for additional security.

Step 4: Attach the Side Skirts

Side skirts enhance the vehicle’s side profile and contribute to better aerodynamics. Here’s how to install them.

  • Position the side skirts along the vehicle’s body.
  • Use the provided clips and screws to attach them securely.
  • Check for even alignment on both sides.
  • Apply adhesive promoter to the edges for added stability.

Step 5: Install the Rear Diffuser

The rear diffuser is the final piece that completes the look and functionality of your aero kit. Follow these steps for installation.

  • Align the rear diffuser with the mounting points at the back of the vehicle.
  • Secure it using the socket wrench and screws.
  • Ensure it fits snugly against the rear bumper.
  • Double-check all fastenings and apply adhesive promoter as needed.

Final Checks and Reconnection

After the installation of the carbon fiber aero kit, it’s important to perform final checks and reconnect the battery.

  • Inspect all components to ensure they are securely attached.
  • Reconnect the battery.
  • Take the vehicle for a test drive to ensure everything functions correctly.
  • Enjoy the enhanced performance and look of your Mercedes AMG GLC 63 S!

By following these five easy steps, you can successfully install a carbon fiber aero kit on your Mercedes AMG GLC 63 S. This upgrade not only improves the vehicle’s appearance but also enhances its performance on the road.