Table of Contents
Installing a boost control module can significantly enhance your vehicle’s performance, especially in roll racing scenarios. This guide will walk you through the steps necessary to install a $4,500 AEM Boost Control Module effectively.
Understanding the AEM Boost Control Module
The AEM Boost Control Module is a sophisticated device designed to manage boost levels in turbocharged engines. It allows for precise control over boost pressure, which can lead to improved performance and responsiveness. Here are some key features:
- Real-time boost monitoring
- Adjustable boost levels
- Data logging capabilities
- Compatibility with various engine management systems
Tools and Materials Needed
Before starting the installation, gather the following tools and materials:
- AEM Boost Control Module
- Wiring harness
- Socket set
- Screwdrivers (flathead and Phillips)
- Wire strippers and crimpers
- Electrical tape
- Multimeter
- Heat shrink tubing
Step-by-Step Installation Process
Step 1: Disconnect the Battery
Before beginning the installation, ensure that the vehicle’s battery is disconnected to prevent any electrical shorts or shocks.
Step 2: Locate the Installation Area
Identify a suitable location in your engine bay for mounting the AEM Boost Control Module. It should be easily accessible for adjustments and wiring connections.
Step 3: Mount the AEM Module
Using the provided mounting hardware, secure the AEM Boost Control Module in the chosen location. Ensure it is stable and won’t be affected by engine vibrations.
Step 4: Wiring the Module
Follow the wiring diagram provided in the AEM manual. Connect the appropriate wires to the module, ensuring that:
- Power wire connects to a switched ignition source
- Ground wire connects to a solid chassis ground
- Boost pressure sensor wire connects to the designated input
Step 5: Connect to the Engine Management System
If your vehicle is equipped with an aftermarket engine management system, connect the AEM module to it according to the manufacturer’s instructions. This may involve additional wiring and programming.
Step 6: Finalize Connections
Once all connections are made, use electrical tape and heat shrink tubing to secure and insulate the wires to prevent any short circuits.
Step 7: Reconnect the Battery
After ensuring all connections are secure, reconnect the vehicle’s battery. Check for any loose wires or connections.
Step 8: Testing the Installation
Start the vehicle and monitor the AEM Boost Control Module for proper functionality. Check boost levels and ensure that the module is responding accurately to adjustments.
Troubleshooting Common Issues
If you encounter issues during installation or operation, consider the following troubleshooting tips:
- Check all wiring connections for security and proper routing.
- Verify that the power source is functioning.
- Ensure that the boost pressure sensor is calibrated and functioning correctly.
- Consult the AEM manual for specific error codes or troubleshooting steps.
Conclusion
Installing the AEM Boost Control Module can dramatically improve your vehicle’s performance in roll racing situations. By following this guide, you can ensure a successful installation that maximizes your engine’s capabilities.