Installation Guide for the Bosch Autologic Obd2 Scanner: How to Unlock up to 25 Hp in Your Vehicle

by

The Bosch AutoLogic OBD2 Scanner is a powerful tool that can help you enhance your vehicle’s performance. By unlocking additional horsepower, you can improve acceleration and overall driving experience. This guide will walk you through the installation process step-by-step.

What You Will Need

  • Bosch AutoLogic OBD2 Scanner
  • Compatible vehicle
  • Basic hand tools
  • Internet connection for software updates
  • Owner’s manual for reference

Step 1: Preparing Your Vehicle

Before you begin the installation, ensure that your vehicle is parked on a level surface and the engine is turned off. This will help avoid any electrical issues during the process.

Check Compatibility

Verify that your vehicle is compatible with the Bosch AutoLogic OBD2 Scanner. Refer to the owner’s manual or the manufacturer’s website for a list of compatible models.

Step 2: Connecting the Scanner

Locate the OBD2 port in your vehicle. This is typically found under the dashboard near the steering column. Once located, follow these steps:

  • Plug the Bosch AutoLogic OBD2 Scanner into the OBD2 port.
  • Ensure that the connection is secure.
  • Turn the vehicle’s ignition to the “On” position without starting the engine.

Step 3: Installing the Software

To maximize the functionality of your Bosch AutoLogic OBD2 Scanner, you will need to install the latest software. Follow these instructions:

  • Connect the scanner to your computer using a USB cable.
  • Visit the Bosch website to download the latest software version.
  • Follow the on-screen instructions to complete the installation.
  • Disconnect the scanner from your computer once the installation is complete.

Step 4: Unlocking Additional Horsepower

Once the software is installed, you can now unlock up to 25 HP in your vehicle. Here’s how:

  • Reconnect the Bosch AutoLogic OBD2 Scanner to the OBD2 port.
  • Turn the ignition to the “On” position.
  • Launch the Bosch software on your scanner.
  • Select the “Performance Upgrade” option from the menu.
  • Follow the prompts to unlock additional horsepower.

Step 5: Testing Your Vehicle

After successfully unlocking the additional horsepower, it’s essential to test your vehicle to ensure everything is functioning correctly. Here’s what to do:

  • Start your vehicle and let it idle for a few minutes.
  • Take the vehicle for a test drive, paying attention to acceleration and responsiveness.
  • Check for any warning lights on the dashboard.

Troubleshooting Common Issues

If you encounter any issues during the installation or use of the Bosch AutoLogic OBD2 Scanner, consider the following troubleshooting tips:

  • Ensure the scanner is properly connected to the OBD2 port.
  • Check that the vehicle’s ignition is in the correct position.
  • Restart the scanner and try the process again.
  • Consult the user manual for specific error codes or messages.

Conclusion

The Bosch AutoLogic OBD2 Scanner is a valuable tool for unlocking additional horsepower in your vehicle. By following this installation guide, you can easily enhance your vehicle’s performance and enjoy a more dynamic driving experience. Always ensure that you follow the steps carefully and consult the manual for any specific concerns.