Table of Contents
Upgrading to a G-Force GF-5R transmission can significantly enhance your vehicle’s torque capacity, making it ideal for high-performance applications. This installation guide will walk you through the necessary steps to successfully upgrade your transmission.
Tools and Materials Needed
- G-Force GF-5R Transmission
- Transmission fluid
- Wrench set
- Screwdriver set
- Torque wrench
- Jack and jack stands
- Transmission jack (optional)
- Safety goggles and gloves
Preparation Steps
Before starting the installation, ensure you have a clean workspace and all necessary tools. Follow these preparation steps:
- Disconnect the vehicle’s battery.
- Raise the vehicle using a jack and secure it with jack stands.
- Remove the driveshaft by unbolting it from the rear differential and sliding it out of the transmission.
Removing the Old Transmission
To install the G-Force GF-5R transmission, you must first remove the existing transmission. Follow these steps:
- Unbolt the transmission crossmember and lower it.
- Disconnect the transmission cooler lines.
- Remove the electrical connectors from the transmission.
- Unbolt the torque converter from the flexplate.
- Support the transmission with a transmission jack.
- Unbolt the transmission from the engine and carefully slide it out.
Installing the G-Force GF-5R Transmission
With the old transmission removed, you can now install the G-Force GF-5R transmission. Follow these steps:
- Align the G-Force GF-5R transmission with the engine and carefully slide it into place.
- Secure the transmission to the engine using the bolts removed earlier.
- Reinstall the torque converter onto the flexplate and secure it.
- Reconnect the electrical connectors and transmission cooler lines.
- Reinstall the transmission crossmember and secure it.
Finalizing the Installation
Once the transmission is installed, you will need to finalize the installation process:
- Reinstall the driveshaft and secure it to the rear differential.
- Fill the transmission with the appropriate transmission fluid.
- Reconnect the vehicle’s battery.
- Start the vehicle and check for any leaks.
- Test drive the vehicle to ensure proper operation.
Conclusion
Upgrading to a G-Force GF-5R transmission can greatly enhance your vehicle’s performance. By following this installation guide, you can ensure a successful upgrade that will increase your torque capacity and improve overall driving experience.