Table of Contents
The Ricochet Performance Cat-back Exhaust system is a popular upgrade for the Dodge Durango Hellcat, enhancing both performance and sound. Proper installation is key to ensuring that you maximize the benefits of this exhaust system. Here are some essential tips to help you through the installation process.
Preparation Before Installation
Before starting the installation of your Ricochet Performance Cat-back Exhaust, make sure you have all the necessary tools and parts. Here’s a checklist to guide you:
- Ricochet Performance Cat-back Exhaust Kit
- Socket set
- Wrench set
- Rubber mallet
- Jack and jack stands
- Safety glasses
- Gloves
Ensure your vehicle is parked on a flat surface and the engine is cool before you begin. Safety should always be your first priority.
Step-by-Step Installation Guide
Step 1: Raise the Vehicle
Using a jack, lift the rear of your Dodge Durango Hellcat. Secure the vehicle with jack stands to ensure stability during the installation process.
Step 2: Remove the Stock Exhaust
Start by removing the stock exhaust system. Locate the hangers and use a wrench to detach the bolts. You may need to use a rubber mallet to help dislodge the exhaust from the hangers.
Be cautious of any remaining exhaust clamps, as they will need to be removed as well. Once everything is disconnected, carefully lower the stock exhaust and set it aside.
Step 3: Prepare the New Exhaust System
Unbox your Ricochet Performance Cat-back Exhaust and lay out all components. Familiarize yourself with the parts to ensure you have everything needed for installation.
Step 4: Install the New Exhaust System
Begin by attaching the new exhaust pipes to the factory connection points. Use the provided clamps to secure the pipes in place. Make sure to align the exhaust tips properly before tightening the clamps.
Next, attach the hangers to the new exhaust system. Ensure that the exhaust is hanging straight and is not touching any other components of the vehicle.
Step 5: Tighten All Connections
Once everything is in place, go back and tighten all the bolts and clamps securely. Double-check that there are no loose connections, as this can lead to exhaust leaks.
Post-Installation Checks
After completing the installation, it’s crucial to perform a few checks:
- Start the engine and listen for any unusual sounds.
- Check for exhaust leaks around the joints and connections.
- Ensure the exhaust is not hitting any parts of the vehicle.
Take your Dodge Durango Hellcat for a short drive to ensure everything is functioning properly. Pay attention to the sound and performance of the exhaust system.
Maintenance Tips
To keep your Ricochet Performance Cat-back Exhaust in top condition, consider the following maintenance tips:
- Regularly inspect for rust or damage.
- Check the clamps and bolts periodically to ensure they are tight.
- Clean the exhaust tips to maintain their appearance.
By following these maintenance tips, you can extend the life of your exhaust system and maintain optimal performance.
Conclusion
Installing the Ricochet Performance Cat-back Exhaust on your Dodge Durango Hellcat can significantly improve your vehicle’s performance and sound. By following the steps outlined in this guide, you can ensure a successful installation. Always prioritize safety and take your time to achieve the best results.