Installation Tips: Mounting Bolt-on 10mm Spacers on a Mustang Gt – Step-by-step

by

Installing bolt-on 10mm spacers on a Mustang GT can enhance the vehicle’s stance and improve handling. This article provides a step-by-step guide to help you install these spacers effectively and safely.

Tools and Materials Needed

  • 10mm wheel spacers
  • Torque wrench
  • Socket set
  • Jack and jack stands
  • Wheel chocks
  • Cleaning supplies (brake cleaner, cloth)

Before starting the installation, ensure you have all the necessary tools and materials at hand. This will make the process smoother and more efficient.

Step 1: Prepare Your Mustang GT

Begin by parking your Mustang GT on a flat surface. Engage the parking brake and place wheel chocks behind the rear wheels to prevent any movement.

Step 1.1: Loosen Wheel Lug Nuts

Using the appropriate socket, loosen the lug nuts on the front wheels slightly while the car is still on the ground. Do not remove them completely yet.

Step 2: Lift the Vehicle

Using a jack, lift the front of the Mustang GT and secure it with jack stands. Ensure the vehicle is stable before proceeding.

Step 3: Remove the Wheels

Now that the vehicle is secure, remove the loosened lug nuts completely and take off the front wheels. Set them aside in a safe location.

Step 4: Clean the Hub Surface

Before installing the spacers, clean the hub surface thoroughly using brake cleaner and a cloth. This ensures a proper fit and prevents any debris from affecting the installation.

Step 5: Install the Spacers

Align the bolt-on 10mm spacers with the hub and press them into place. Make sure they are seated correctly and flush against the hub surface.

Step 5.1: Secure the Spacers

Using the provided bolts or lug nuts, secure the spacers to the hub. Hand-tighten them first to ensure they are properly aligned.

Step 6: Reinstall the Wheels

Place the front wheels back onto the vehicle, ensuring that the holes align with the spacers. Hand-tighten the lug nuts to hold the wheels in place.

Step 7: Torque the Lug Nuts

Using a torque wrench, tighten the lug nuts to the manufacturer’s specified torque setting. This is crucial for ensuring that the wheels are securely attached.

Step 8: Lower the Vehicle

Carefully lower the vehicle back to the ground using the jack. Remove the jack stands and make sure the vehicle is stable.

Step 9: Final Checks

Once the vehicle is back on the ground, double-check that all lug nuts are properly torqued. It’s also a good idea to take the Mustang GT for a short test drive to ensure everything is functioning correctly.

Conclusion

Installing bolt-on 10mm spacers on your Mustang GT can greatly enhance its appearance and performance. By following these steps carefully, you can ensure a successful installation. Always remember to prioritize safety and double-check your work.