Table of Contents
The 991.2 Turbo S is a marvel of engineering, combining luxury with performance. One of the most effective ways to enhance its performance and sound is by upgrading the exhaust system. In this article, we will explore the process of installing a 991.2 Turbo S exhaust system, which can boost sound and power by an impressive 50 hp.
Understanding the Benefits of an Upgraded Exhaust System
Before diving into the installation process, it’s essential to understand the benefits of upgrading your exhaust system. An aftermarket exhaust can improve both the sound and performance of your vehicle. Here are some key advantages:
- Increased Horsepower: An upgraded exhaust can significantly enhance engine performance, adding up to 50 hp.
- Improved Sound: Many enthusiasts appreciate a more aggressive exhaust note that enhances the driving experience.
- Weight Reduction: Aftermarket systems are often lighter, contributing to better handling and acceleration.
- Enhanced Aesthetics: A new exhaust can improve the visual appeal of the vehicle’s rear end.
Tools and Materials Needed
Before starting the installation, gather all necessary tools and materials to ensure a smooth process. Here’s what you’ll need:
- Socket set
- Torque wrench
- Jack and jack stands
- Cutting tool (if necessary)
- New exhaust system
- Exhaust hangers and clamps
- Safety glasses and gloves
Preparation for Installation
Before you begin the installation, it’s crucial to prepare your workspace and vehicle. Follow these steps:
- Park on a Level Surface: Ensure the vehicle is parked on a flat surface to avoid any accidents.
- Engage the Parking Brake: Always engage the parking brake to prevent rolling.
- Disconnect the Battery: To avoid any electrical issues, disconnect the negative terminal of the battery.
- Lift the Vehicle: Use a jack to lift the vehicle and secure it with jack stands for safety.
Removing the Stock Exhaust System
With the vehicle prepared, it’s time to remove the stock exhaust system. Follow these steps carefully:
- Locate the Exhaust Bolts: Find the bolts connecting the stock exhaust to the turbo and muffler.
- Remove Bolts: Use a socket set to remove the bolts. Keep them for reinstallation if needed.
- Detach Exhaust Hangers: Carefully remove the exhaust hangers holding the system in place. A lubricant can help ease this process.
- Remove the Exhaust: Once all bolts and hangers are detached, carefully lower the stock exhaust system from the vehicle.
Installing the New Exhaust System
Now it’s time to install your new exhaust system. Follow these steps for a successful installation:
- Position the New Exhaust: Align the new exhaust system with the mounting points and hangers.
- Secure the Exhaust: Attach the exhaust hangers and tighten the bolts to secure the system in place.
- Check for Proper Fit: Ensure that the exhaust is positioned correctly and does not interfere with any components.
- Reconnect the Battery: Once everything is secured, reconnect the negative terminal of the battery.
Final Checks and Testing
After installation, it’s crucial to perform some final checks before hitting the road:
- Inspect for Leaks: Start the engine and check for any exhaust leaks around the connections.
- Listen for Unusual Sounds: Listen carefully for any rattles or unusual noises that may indicate improper installation.
- Test Drive: Take the vehicle for a short drive to experience the new sound and performance.
Conclusion
Upgrading the exhaust system on your 991.2 Turbo S can significantly enhance both its power and sound. By following the steps outlined in this article, you can successfully install a new exhaust system and enjoy the benefits it brings. Whether for performance or personal preference, this upgrade is a worthy investment for any Turbo S owner.