Table of Contents
The Veloster N is known for its sporty performance and thrilling driving experience. Upgrading to a Borla cat-back exhaust can enhance both the sound and efficiency of your vehicle. In this guide, we will provide a detailed step-by-step process for installing a Borla cat-back exhaust on your Veloster N, along with a cost breakdown to help you budget for this upgrade.
Tools and Materials Needed
- Borla Cat-Back Exhaust System
- Socket Set
- Wrench Set
- Jack and Jack Stands
- Safety Glasses
- Gloves
- Cutting Tool (if necessary)
- Exhaust Hangers (if not included)
Step 1: Prepare Your Vehicle
Before beginning the installation, ensure your Veloster N is parked on a flat surface. Engage the parking brake and wear safety glasses and gloves for protection. If necessary, lift the vehicle using a jack and secure it with jack stands.
Step 2: Remove the Stock Exhaust System
Start by locating the stock exhaust system. Use a socket set to remove the bolts connecting the exhaust to the catalytic converter. If the exhaust is rusted or stuck, you may need to use a cutting tool to separate it.
Next, remove the exhaust hangers using a wrench. Carefully slide the stock exhaust out from under the vehicle, ensuring that you do not damage any surrounding components.
Step 3: Install the Borla Cat-Back Exhaust
With the stock exhaust removed, it’s time to install the Borla cat-back exhaust. Begin by positioning the new exhaust under the vehicle. Align it with the existing mounting points and ensure that the exhaust tips are centered.
Attach the exhaust to the catalytic converter using the provided bolts. Be sure to tighten them securely with a socket wrench. If your kit includes new exhaust hangers, install them as well to ensure a snug fit.
Step 4: Adjust and Secure the Exhaust System
After the exhaust is in place, check the alignment of the exhaust tips. Make any necessary adjustments to ensure that they are level and properly positioned. Once satisfied, tighten all bolts and hangers to secure the exhaust system in place.
Step 5: Test the Exhaust System
Before lowering the vehicle, start the engine to test the new exhaust system. Listen for any unusual sounds that may indicate a leak or improper installation. If everything sounds good, turn off the engine and proceed to lower the vehicle.
Cost Breakdown
Understanding the costs involved in this upgrade can help you make informed decisions. Below is a breakdown of the potential expenses:
- Borla Cat-Back Exhaust System: $800 – $1,200
- Tools (if not owned): $100 – $200
- Labor (if using a shop): $100 – $300
In total, you can expect to spend between $1,000 and $1,700 for the entire process, depending on whether you choose to install it yourself or hire a professional.
Conclusion
Installing a Borla cat-back exhaust on your Veloster N can significantly enhance your vehicle’s performance and sound. By following this step-by-step guide, you can complete the installation yourself and enjoy the benefits of this upgrade. Remember to always prioritize safety and consult a professional if you feel uncertain about any steps in the process.