Table of Contents
Installing a Borla S-type exhaust on your Civic Type R can enhance both performance and sound. This guide will walk you through the installation process step-by-step, while also reviewing the performance benefits of this aftermarket exhaust system.
Tools and Materials Needed
- Socket set
- Wrench set
- Jack and jack stands
- Torque wrench
- Cutting tool (if necessary)
- Safety glasses
- Work gloves
- Borla S-type exhaust system
Preparation Steps
Before starting the installation, ensure that your vehicle is parked on a flat surface. Engage the parking brake and wear safety glasses and gloves throughout the process.
Step 1: Raise the Vehicle
Using a jack, lift the rear of your Civic Type R and secure it with jack stands. This will provide access to the exhaust system underneath the car.
Step 2: Remove the Stock Exhaust
Locate the stock exhaust system. Use your socket set to remove the bolts connecting the exhaust to the catalytic converter and the hangers supporting it. If necessary, use a cutting tool to remove any rusted or damaged sections.
Step 3: Prepare for the New Exhaust
Once the stock exhaust is removed, clean the exhaust flanges on the catalytic converter. This ensures a good seal when installing the new Borla exhaust.
Installing the Borla S-type Exhaust
Step 4: Position the New Exhaust
Carefully position the Borla S-type exhaust under the vehicle. Align the exhaust tips and the flanges with the catalytic converter. Ensure that the exhaust hangers are also aligned with the factory mounting points.
Step 5: Secure the Exhaust
Using the provided hardware, attach the exhaust to the catalytic converter. Tighten the bolts using a torque wrench to the specifications provided in the installation manual. Secure the hangers to the factory mounting points.
Step 6: Check for Leaks
After installation, start the engine and let it idle. Listen for any exhaust leaks and check for any unusual sounds. If everything sounds normal, proceed to the next step.
Performance Review
The Borla S-type exhaust is known for its aggressive sound and performance enhancements. Here are some key benefits:
- Improved Horsepower: Many users report noticeable increases in horsepower, enhancing overall performance.
- Enhanced Sound: The S-type exhaust produces a deep, aggressive tone that many enthusiasts appreciate.
- Weight Reduction: The Borla exhaust is typically lighter than the stock system, contributing to better handling.
- Durability: Made from high-quality materials, the Borla exhaust is designed to last.
Conclusion
Installing a Borla S-type exhaust on your Civic Type R is a straightforward process that can significantly enhance your driving experience. With improved performance and sound, this upgrade is a popular choice among enthusiasts.
Always remember to follow safety precautions and consult with a professional if you’re unsure about any steps in the installation process. Enjoy your new exhaust!