Table of Contents
Upgrading your vehicle’s performance can be an exciting project, and installing a Borla Turbo Downpipe is a great way to enhance your car’s exhaust flow and power. This guide provides step-by-step instructions to help you install a Borla Turbo Downpipe seamlessly.
What You Will Need
- Borla Turbo Downpipe
- Socket set
- Wrench set
- Torque wrench
- Jack and jack stands
- Safety goggles
- Gloves
- Anti-seize compound
Preparation Steps
Before starting the installation, ensure you have all the necessary tools and parts. Follow these preparation steps:
- Park your vehicle on a flat surface.
- Engage the parking brake.
- Disconnect the negative battery terminal to avoid any electrical issues.
- Raise the vehicle using a jack and secure it with jack stands.
Removing the Stock Downpipe
To install the Borla Turbo Downpipe, you first need to remove the stock downpipe. Follow these steps:
- Locate the stock downpipe under the vehicle.
- Remove any heat shields or brackets that may obstruct access.
- Unbolt the downpipe from the turbocharger and exhaust system using the socket set.
- Carefully pull the downpipe out and set it aside.
Installing the Borla Turbo Downpipe
Now that the stock downpipe is removed, you can proceed with the installation of the Borla Turbo Downpipe:
- Apply anti-seize compound to the threads of the bolts.
- Position the Borla Turbo Downpipe in place, ensuring it aligns with the turbocharger and exhaust system.
- Secure the downpipe using the provided bolts, tightening them by hand initially.
- Use a torque wrench to tighten the bolts to the manufacturer’s specifications.
Reinstalling Heat Shields and Brackets
After securing the downpipe, reinstall any heat shields or brackets that were removed earlier:
- Align the heat shields with the mounting points.
- Use the appropriate bolts to secure the heat shields in place.
- Double-check that everything is tightly fastened.
Final Steps
Complete the installation by following these final steps:
- Reconnect the negative battery terminal.
- Lower the vehicle from the jack stands.
- Start the engine and check for any leaks or unusual sounds.
- Take the car for a test drive to ensure everything is functioning properly.
Conclusion
Installing a Borla Turbo Downpipe can significantly improve your vehicle’s performance. By following these step-by-step instructions, you can ensure a seamless upgrade. Always remember to consult your vehicle’s specific manual for any additional requirements or specifications.