Table of Contents
Installing a Centerforce Street/Strip flywheel can significantly enhance your vehicle’s performance. This article will guide you through the costs associated with the installation, the step-by-step process, and some helpful tips to ensure a successful installation.
Understanding the Costs
The cost of installing a Centerforce Street/Strip flywheel varies based on several factors. Here’s a breakdown of what you can expect:
- Flywheel Price: The price for a Centerforce flywheel typically ranges from $300 to $600.
- Labor Costs: If you’re not installing it yourself, labor costs can range from $100 to $200 per hour, depending on the shop.
- Additional Parts: You may need to purchase additional parts such as a new clutch, bolts, or pilot bearings, which can add another $100 to $300.
The Installation Process
Installing the flywheel involves several steps. It’s essential to follow these instructions carefully to ensure proper installation and function.
Tools Required
- Socket set
- Torque wrench
- Flywheel holder tool
- Clutch alignment tool
- Jack and jack stands
Step-by-Step Installation
Follow these steps to install your Centerforce Street/Strip flywheel:
- 1. Prepare the Vehicle: Park the vehicle on a level surface, engage the parking brake, and disconnect the battery.
- 2. Remove the Transmission: Support the transmission with a jack, unbolt it from the engine, and carefully slide it out.
- 3. Remove the Old Flywheel: Unbolt the existing flywheel, taking care to note the order of the bolts.
- 4. Clean the Surface: Clean the engine block surface where the new flywheel will sit to ensure a proper seal.
- 5. Install the New Flywheel: Position the Centerforce flywheel on the engine and secure it using the provided bolts, tightening them to the manufacturer’s specifications.
- 6. Reinstall the Clutch: If replacing, install the new clutch disc and pressure plate, using the clutch alignment tool for accuracy.
- 7. Reattach the Transmission: Carefully slide the transmission back into place and bolt it securely.
- 8. Reconnect the Battery: Once everything is reassembled, reconnect the battery and check for any loose connections.
Tips for a Successful Installation
Here are some tips to help ensure your installation goes smoothly:
- Read the Instructions: Always refer to the manufacturer’s instructions that come with your flywheel for specific details.
- Check Compatibility: Ensure the flywheel is compatible with your vehicle’s make and model.
- Use Quality Tools: Using high-quality tools can prevent damage to the flywheel and ensure a secure fit.
- Torque Specifications: Follow the recommended torque specifications for all bolts to avoid any issues.
- Inspect Other Components: While you have the transmission removed, inspect other components like the clutch and pilot bearing.
Conclusion
Installing a Centerforce Street/Strip flywheel can be a rewarding project that enhances your vehicle’s performance. By understanding the costs, following the installation process, and utilizing helpful tips, you can ensure a successful upgrade. Enjoy the improved performance and driving experience!