Table of Contents
Installing a Garrett GT3076R turbocharger on your Mitsubishi Eclipse can significantly enhance its performance. This article will guide you through the cost, steps, and expected results of this modification.
Understanding the Garrett GT3076R Turbo
The Garrett GT3076R is a popular turbocharger known for its efficiency and power output. It is suitable for various applications, particularly in the Mitsubishi Eclipse. With the right setup, it can deliver impressive gains in horsepower and torque.
Cost of Installation
The cost of installing a Garrett GT3076R turbo on your Mitsubishi Eclipse can vary based on several factors. Below is a breakdown of potential expenses:
- Turbocharger: $1,200 – $1,800
- Installation Kit: $200 – $500
- Labor Costs: $500 – $1,000
- Tuning: $300 – $600
- Miscellaneous Parts: $100 – $300
Overall, you can expect to spend between $2,400 and $4,200 for a complete installation, depending on your specific vehicle and needs.
Preparation for Installation
Before starting the installation, ensure you have all necessary tools and parts. Here’s a list of items you will need:
- Socket set
- Wrenches
- Screwdrivers
- Torque wrench
- Boost gauge
- Oil and coolant
- New gaskets and seals
Additionally, make sure your vehicle is in good condition and consider performing any necessary maintenance before proceeding with the turbo installation.
Steps to Install the Garrett GT3076R Turbo
Step 1: Remove the Existing Turbo
Begin by disconnecting the battery. Next, remove the existing turbocharger and any associated components, such as the intake manifold and exhaust manifold. Be sure to label parts for easier reassembly.
Step 2: Install the Garrett GT3076R Turbo
Position the Garrett GT3076R turbo in place and secure it using the provided bolts. Ensure that all gaskets and seals are properly installed to prevent leaks.
Step 3: Connect Oil and Coolant Lines
Connect the oil feed and return lines to the turbo. Make sure to use the correct fittings and ensure all connections are tight. Repeat this process for the coolant lines.
Step 4: Reinstall the Intake and Exhaust Manifolds
Reattach the intake manifold and exhaust manifold. Check that all bolts are torqued to the manufacturer’s specifications to ensure a secure fit.
Step 5: Install the Intercooler and Piping
Install the intercooler and connect the piping from the turbo to the intercooler and then to the intake manifold. Ensure all clamps are tight to prevent boost leaks.
Step 6: Final Checks and Tuning
Before starting the engine, double-check all connections and fittings. Once everything is secure, reconnect the battery and start the engine. Monitor for any leaks and ensure the turbo is functioning correctly. Finally, take your vehicle to a professional for tuning to maximize performance.
Expected Results
After successfully installing the Garrett GT3076R turbo, you can expect significant performance improvements. Here are some potential results:
- Increased horsepower: 300-400 HP depending on supporting mods
- Improved torque: Enhanced low-end and mid-range torque
- Better throttle response: Quicker acceleration
- Enhanced driving experience: More enjoyable and engaging to drive
Overall, installing a Garrett GT3076R turbocharger can transform your Mitsubishi Eclipse into a high-performance machine, providing you with exhilarating power and speed.