Table of Contents
The Mitsubishi Lancer Evolution 8 (Evo 8) is renowned for its impressive performance and tuning potential. One of the most effective upgrades for enhancing its performance is the installation of a high-quality intercooler. The Greddy EnduraBoost intercooler is a popular choice among enthusiasts. In this article, we will guide you through the process of installing the Greddy EnduraBoost intercooler on your Evo 8, highlighting the benefits and considerations for this upgrade.
Benefits of Upgrading to a Greddy EnduraBoost Intercooler
Upgrading to a Greddy EnduraBoost intercooler offers several advantages that can significantly enhance your Evo 8’s performance and reliability. Here are some key benefits:
- Improved Cooling Efficiency: The larger core size of the Greddy intercooler allows for better heat dissipation, which helps maintain optimal intake temperatures.
- Increased Power Output: By reducing the intake air temperature, the engine can achieve more power and torque, resulting in improved acceleration.
- Enhanced Reliability: Lower intake temperatures reduce the risk of engine knock, which can lead to engine damage over time.
- Quality Construction: Greddy products are known for their durability and quality, ensuring that your intercooler will withstand demanding conditions.
Tools and Materials Needed
Before you begin the installation process, gather the necessary tools and materials. Here’s what you will need:
- Greddy EnduraBoost Intercooler Kit
- Socket set and ratchet
- Wrenches (various sizes)
- Intercooler piping (if not included in the kit)
- Hoses and clamps
- Cutting tool (for trimming piping, if necessary)
- Torque wrench
- Safety glasses and gloves
Step-by-Step Installation Guide
Step 1: Prepare Your Workspace
Start by ensuring your workspace is clean and organized. Make sure you have plenty of room to work around your vehicle. It’s also a good idea to disconnect the battery to avoid any electrical issues during the installation.
Step 2: Remove the Stock Intercooler
To install the Greddy intercooler, you first need to remove the stock intercooler. Follow these steps:
- Locate the stock intercooler and its associated piping.
- Using your socket set, remove the bolts securing the intercooler to the front of the vehicle.
- Disconnect the piping and any hoses connected to the stock intercooler.
- Carefully remove the stock intercooler from the vehicle.
Step 3: Install the Greddy EnduraBoost Intercooler
With the stock intercooler removed, it’s time to install the Greddy EnduraBoost intercooler. Follow these steps:
- Position the Greddy intercooler in place, ensuring it fits securely in the mounting brackets.
- Reconnect the piping to the intercooler, making sure all connections are tight.
- Use the provided clamps to secure the hoses and connections.
- Double-check all fittings to ensure there are no leaks.
Step 4: Reassemble and Test
Once the intercooler is installed, it’s time to reassemble any components you removed during the process. Follow these steps:
- Reattach any front bumper components that were removed for access.
- Reconnect the battery.
- Start the engine and check for any leaks around the intercooler and piping.
- Take your Evo 8 for a test drive to ensure the intercooler is functioning properly and monitor performance.
Conclusion
Installing a Greddy EnduraBoost intercooler on your Evo 8 can significantly enhance your vehicle’s performance and reliability. By following the steps outlined in this guide, you can successfully upgrade your intercooler and enjoy the benefits of improved cooling efficiency and increased power output. Always remember to perform regular maintenance and check for any issues after installation to keep your Evo 8 running at its best.