Table of Contents
Upgrading the exhaust system of your Honda Prelude can significantly enhance its performance and sound. One popular choice among car enthusiasts is the Greddy exhaust system. This article will guide you through the cost, steps, and power impact of installing a Greddy exhaust on your Honda Prelude.
Understanding the Greddy Exhaust System
The Greddy exhaust system is known for its high-quality construction and performance benefits. It is designed to improve exhaust flow, which can lead to increased horsepower and torque. Additionally, the unique design of the Greddy exhaust provides a deeper and more aggressive sound, enhancing the driving experience.
Cost of the Greddy Exhaust System
The cost of a Greddy exhaust system for a Honda Prelude can vary based on several factors, including the model year and any additional components you may need. On average, you can expect to pay:
- Greddy exhaust system: $600 – $1,200
- Installation labor (if not DIY): $100 – $300
- Additional parts (gaskets, hangers): $50 – $100
Overall, the total cost for purchasing and installing a Greddy exhaust system can range from $750 to $1,600, depending on your specific situation.
Steps to Install a Greddy Exhaust on Your Honda Prelude
Installing a Greddy exhaust system can be a rewarding DIY project if you have basic mechanical skills. Here are the steps you should follow:
Tools and Materials Needed
- Jack and jack stands
- Socket set
- Wrench set
- Torque wrench
- Greddy exhaust system
- New gaskets and hangers (if necessary)
Step-by-Step Installation Guide
- Prepare the Vehicle: Park your Honda Prelude on a flat surface and engage the parking brake. Use the jack to lift the rear of the car and secure it with jack stands.
- Remove the Old Exhaust: Start by removing the existing exhaust system. Use the socket set to unbolt the exhaust from the headers and any hangers holding it in place. Carefully take out the old exhaust.
- Install New Gaskets: Before installing the Greddy exhaust, place new gaskets on the exhaust flanges to ensure a proper seal.
- Attach the Greddy Exhaust: Align the Greddy exhaust with the headers and hangers. Use the bolts and nuts provided in the kit to secure it in place. Ensure that it fits snugly and does not touch any other components.
- Tighten Everything: Use the torque wrench to tighten the bolts to the manufacturer’s specifications. This is crucial to avoid leaks.
- Check for Leaks: Start the engine and let it idle. Inspect the exhaust system for any signs of leaks. If you notice any, re-tighten the connections.
- Lower the Vehicle: Once everything is secure and leak-free, carefully lower the vehicle back to the ground.
Following these steps will help you successfully install a Greddy exhaust system on your Honda Prelude, enhancing its performance and sound.
Power Impact of a Greddy Exhaust
One of the primary reasons for upgrading to a Greddy exhaust system is the potential power gains. Here’s what you can expect:
- Increased Horsepower: Many Honda Prelude owners report an increase of 10-15 horsepower after installing a Greddy exhaust, depending on other modifications.
- Improved Torque: Along with horsepower, torque can also see a boost, enhancing acceleration and overall performance.
- Better Throttle Response: The enhanced exhaust flow can improve throttle response, making the vehicle feel more responsive.
Overall, the Greddy exhaust system not only adds a sporty sound but also contributes to the overall performance of your Honda Prelude.
Conclusion
Installing a Greddy exhaust on your Honda Prelude is a worthwhile investment for those looking to enhance their vehicle’s performance and sound. With a reasonable cost and a straightforward installation process, you can enjoy the benefits of increased horsepower and a more aggressive exhaust note. Whether you choose to install it yourself or seek professional help, the Greddy exhaust system will elevate your driving experience.