Table of Contents
Installing a Greddy Exhaust System on your Acura TL Type S can significantly enhance your vehicle’s performance. This modification is not only about aesthetics; it is a practical upgrade that can boost your car’s horsepower by up to 30 HP for an investment of around $1,200.
Why Upgrade to a Greddy Exhaust System?
Upgrading to a Greddy Exhaust System offers numerous benefits that enhance both performance and driving experience. Here are some compelling reasons to consider this modification:
- Increased Horsepower: Gain up to 30 HP, improving acceleration and overall performance.
- Enhanced Sound: Enjoy a more aggressive and sporty exhaust note.
- Improved Exhaust Flow: Reduces back pressure, allowing for better engine efficiency.
- Quality Build: Greddy systems are known for their durability and high-quality materials.
What You Will Need
Before starting the installation, gather the necessary tools and materials. Here’s a list of what you’ll need:
- Greddy Exhaust System specific to Acura TL Type S
- Wrench set
- Screwdriver set
- Jack and jack stands
- Safety glasses and gloves
- Torque wrench
Step-by-Step Installation Guide
Follow these steps to install your Greddy Exhaust System successfully:
Step 1: Prepare Your Vehicle
Start by parking your Acura TL Type S on a flat surface and engaging the parking brake. Use a jack to lift the rear of the car and secure it with jack stands for safety.
Step 2: Remove the Stock Exhaust
Using a wrench, loosen the bolts that connect the stock exhaust system to the exhaust manifold and the rubber hangers that hold the exhaust in place. Carefully remove the stock exhaust system from your vehicle.
Step 3: Install the Greddy Exhaust System
Position the Greddy Exhaust System in place. Start by attaching it to the exhaust manifold and then secure the rubber hangers. Ensure that everything is aligned properly before tightening the bolts.
Step 4: Tighten All Connections
Using a torque wrench, tighten all bolts to the manufacturer’s specifications. This step is crucial to prevent any exhaust leaks and ensure a secure fit.
Step 5: Check for Leaks
Start your vehicle and let it idle for a few minutes. Listen for any unusual sounds and check for exhaust leaks around the connections. If everything sounds and looks good, you’re ready to hit the road!
Tips for a Successful Installation
To ensure a smooth installation process, consider the following tips:
- Work in a well-ventilated area to avoid inhaling exhaust fumes.
- Have a friend assist you, especially when lifting the exhaust system into place.
- Follow the manufacturer’s instructions carefully for best results.
- Take your time to prevent mistakes and ensure a proper fit.
Conclusion
Installing a Greddy Exhaust System on your Acura TL Type S is a rewarding project that can enhance your vehicle’s performance and sound. With the right tools and a bit of patience, you can achieve a significant boost in horsepower and enjoy a more thrilling driving experience. For around $1,200, this upgrade is a worthwhile investment for any Acura enthusiast.