Installing a Greddy Front Mount Intercooler on Your Sw20: Step-by-step Guide

by

Installing a Greddy Front Mount Intercooler on your SW20 can significantly enhance performance and cooling efficiency. This guide will walk you through the step-by-step process to ensure a successful installation.

Tools and Materials Needed

  • Greddy Front Mount Intercooler Kit
  • Socket set
  • Wrenches
  • Screwdrivers
  • Hoses and clamps
  • Heat shield (if applicable)
  • Support stands
  • Safety goggles
  • Gloves

Preparation Steps

Before diving into the installation, make sure to prepare your workspace and gather all necessary tools and materials. Follow these steps:

  • Park your SW20 on a flat surface and engage the parking brake.
  • Disconnect the battery to ensure safety during installation.
  • Lift the front of the vehicle using support stands for better access.

Removing the Stock Intercooler

To install the Greddy intercooler, you must first remove the stock intercooler. Follow these steps:

  • Locate the stock intercooler and identify the connecting hoses.
  • Carefully disconnect the hoses from the stock intercooler using the appropriate tools.
  • Unbolt the intercooler from its mounting points.
  • Remove the stock intercooler from the vehicle.

Installing the Greddy Front Mount Intercooler

With the stock intercooler removed, you can now install the Greddy front mount intercooler. Follow these steps:

  • Position the Greddy intercooler in the designated area, ensuring it fits snugly.
  • Secure the intercooler with the provided mounting brackets and bolts.
  • Connect the hoses to the new intercooler, ensuring a tight fit.
  • Double-check all connections for leaks or loose fittings.

Connecting the Piping

After securing the intercooler, it’s time to connect the piping. This step is crucial for optimal airflow:

  • Attach the inlet and outlet pipes to the intercooler.
  • Ensure the pipes are aligned and secure them with clamps.
  • Check for any kinks or bends in the piping that could restrict airflow.

Final Steps

With the intercooler and piping installed, follow these final steps:

  • Reconnect the battery and start the vehicle.
  • Check for any leaks around the hoses and fittings.
  • Take the car for a test drive to ensure everything is functioning properly.

Conclusion

Installing a Greddy front mount intercooler on your SW20 is a straightforward process that can greatly improve your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of enhanced cooling efficiency.