Table of Contents
Installing a Greddy Profec B Spec II Boost Controller on your 1G Eclipse can significantly enhance your vehicle’s performance. This article will guide you through the installation process, expected boost gains, and associated costs.
Understanding the Greddy Profec B Spec II Boost Controller
The Greddy Profec B Spec II is a popular electronic boost controller known for its precision and ease of use. It allows drivers to adjust boost levels on-the-fly, providing a customizable driving experience.
This boost controller features a dual boost setting, which can be useful for different driving conditions or preferences. The ability to monitor boost levels in real-time is also a significant advantage.
Tools and Materials Needed
- Greddy Profec B Spec II Boost Controller Kit
- Screwdrivers (flathead and Phillips)
- Socket set
- Wire strippers
- Electrical tape
- Vacuum line (optional)
- Boost gauge (optional)
Installation Steps
Step 1: Prepare Your Workspace
Before starting the installation, ensure that you have a clean and well-lit workspace. Gather all the tools and materials listed above to streamline the process.
Step 2: Disconnect the Battery
Safety first! Disconnect the negative terminal of your battery to prevent any electrical shorts during installation.
Step 3: Mount the Boost Controller
Choose a suitable location for the Greddy Profec B Spec II. It should be easily accessible for adjustments while driving. Use the provided brackets to secure it in place.
Step 4: Connect the Wiring
Follow the wiring diagram included with the boost controller to connect the necessary wires. Ensure all connections are secure and insulated with electrical tape.
Step 5: Install the Boost Source
Locate a suitable boost source on your intake manifold. This is typically done by tapping into a vacuum line. Ensure you use high-quality vacuum line to prevent leaks.
Step 6: Reconnect the Battery
After all connections are made, reconnect the negative terminal of your battery. Check your work for any loose connections or exposed wires.
Step 7: Test the System
Start your vehicle and check for any error codes or warning lights. Adjust the boost settings according to your preferences, and monitor the performance closely during your first few drives.
Boost Gains and Performance Improvements
Installing a Greddy Profec B Spec II can lead to substantial boost gains, typically ranging from 1 to 5 psi, depending on your current setup and tuning. These gains can translate into noticeable improvements in throttle response and overall acceleration.
With proper tuning, many drivers report increased horsepower and torque, enhancing their driving experience. However, it’s essential to ensure that your engine can handle the increased boost levels to avoid potential damage.
Cost Breakdown
The total cost of installing a Greddy Profec B Spec II Boost Controller can vary based on several factors, including whether you choose to perform the installation yourself or hire a professional.
- Greddy Profec B Spec II Boost Controller: $300 – $400
- Installation labor (if applicable): $100 – $200
- Additional materials (vacuum line, electrical tape): $20 – $50
In total, you can expect to spend anywhere from $420 to $650, depending on your choices. Investing in this boost controller can provide significant performance benefits, making it a worthwhile modification for your 1G Eclipse.
Conclusion
Installing a Greddy Profec B Spec II Boost Controller on your 1G Eclipse is a rewarding project that can lead to enhanced performance and driving enjoyment. With the right tools, materials, and a bit of patience, you can achieve impressive boost gains and take your driving experience to the next level.